Roberson
-
Green Felt Burnisher Pockets
Starting at: £4.00
Call to Order
Green Felt Burnisher Pockets (Please note, our short felt pockets only fit burnishers that are labelled as short handled. All other burnishers will fit in the long felt pockets) Learn More -
Roberson Crystal Shellac Varnish
Starting at: £9.30
Clear synthetic varnish with superior clarity. Does not discolour gold and silver leaf. Use as a protective coating over gilded surfaces to prevent tarnishing and for sealing gesso prior to gilding. Learn More -
Roberson Ormoline Gilding Medium
Starting at: £9.50
Acrylic size, fluid enough to use with dip pen. Pink colour. For gilding onto paper and parchment. Learn More -
Roberson Acrylic Gold Size
Starting at: £8.60
Easy to use acrylic gold size. Ready for gilding in 15-20 minutes. 1-2 days open time. Learn More -
Roberson Ormoline Thinner
Starting at: £8.40
Cellulose thinner for paints made with Ormoline Medium. Learn More -
Roberson Ormoline Medium
Starting at: £8.70
Mix with Roberson Standard Bronze Powders to create metallic paint. 25g powder will make 125ml of paint. Learn More -
Roberson Liquid Metal 30ml
Starting at: £7.20
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Liquid Leaf Brush Bath Thinner and Cleaner
Starting at: £9.90
Brush Bath is a paint thinner and solvent especially formulated for the thinning or cleaning of Liquid Leaf. For spray application, use 15-20% Brush Bath with Liquid Leaf. For cleaning, apply to a soft cloth and wipe affected area. For thinning, mix a small amount of Brush Bath with Liquid Leaf, stirring or shaking container until desired consitency. To clean brushes, pour Brush Bath into a small container and let brushes soak.
Learn More