Search results for: '10'

Treasure Gold

Starting at: £12.30

Treasure Gold is a metallic wax which is unparalleled in restoring gold lead and the finishing touches for antiquing. Blend any of the colours together for just the right shade. Apply with the fingers or a cloth and buff lightly. The metal lustre won't fade or tarnish. It is ready to be polished in ten minutes. Treasure Gold is highly concentrated and is to be used sparingly. A 25g jar will cover approximately 2sq/m. Learn More

Cornelissen Silver Leaf Thin

Starting at: £11.00

Cornelissen Silver Leaf Thin, 95 x 95 mm (20g/1000 lvs). Book of 25 leaves Learn More

Maimeri Restoration Colours

Starting at: £17.50

33 colours for restoration. Pigments, mastic resin and turpentine. Learn More

Cornelissen Silver Leaf Thick

Starting at: £14.50

Cornelissen Silver Leaf Thick, 95 x 95 mm (34g/1000 lvs). Book of 25 leaves Learn More

Japanese Gold 24ct

Starting at: £71.00

Highest quality 24ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More

Japanese Gold 14,3ct

Starting at: £48.00

Highest quality 14,3ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More

Roberson Crystal Shellac Varnish

Starting at: £9.30

Clear synthetic varnish with superior clarity. Does not discolour gold and silver leaf. Use as a protective coating over gilded surfaces to prevent tarnishing and for sealing gesso prior to gilding. Learn More

Japanese Gold 22,66ct

Starting at: £55.00

Highest quality 22,66ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More

Japanese Gold 23,44ct

Starting at: £60.00

Highest quality 23,44ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More

Japanese Gold Leaf 22,66ct Enzuke

Starting at: £61.00

Highest quality 22,66ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. Enzuke gold leaf is beaten between sheets of traditional of washi paper called furuya-gami and refers to the subtle grid pattern that appears on the surface of the leaves. In Japan, Enzuke gold is considered more traditional and has a soft lustrous appearance. Each pack contains 10 leaves. Learn More

Professional Gilders Cushion

Starting at: £75.00

L.Cornelissen & Son's Professional Gilders Cushions are handmade in London, using the highest quality materials. Soft, buffed suede nap goatskin stretched over a sturdy mahogany veneer panel, secured with brass tacks and some fitted with a genuine parchment windsheild. Learn More

Japanese Gold 18,12ct

Starting at: £49.00

Highest quality 18,12ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More

Japanese Gold 23ct

Starting at: £55.00

Highest quality 23ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More

Charbonnel Wet Bole (Assiette à Dorer)

Starting at: £61.80

Charbonnel Wet Bole Learn More

Cornelissen 85 Standard Gold Leaf 22 ct

Starting at: £63.50

Standard Gold Leaf 22 ct, 85 x 85 mm. Book of 25 leaves. Coverage per book is 0.18 m2 (1.97 sq. feet) Learn More

Cornelissen Aluminium Leaf

Starting at: £7.40

Coverage per book of 25 leaves is 0.49 m2 (5.29 sq feet) Learn More

Roberson Liquid Metal 1Ltr

Starting at: £60.30

Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Cornelissen 80 Baroque Gold Leaf 19 ct

Starting at: £55.90

Baroque Gold Leaf 19 ct, 80 x 80 mm. Book of 25 leaves. Coverage per book is 0.16 m2 (1.69 sq. feet) Learn More

Cornelissen Imitation Gold No 2.5

Starting at: £7.40

Coverage per book of 25 leaves is 0.49 m2 (5.29 sq feet) Learn More

Roberson Liquid Metal 250ml

Starting at: £18.90

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Roberson Oil Gold Size 3 hour

Starting at: £12.30

Roberson Oil Gold Size 3 hour Learn More

Cornelissen 80 Yellow Gold Leaf 22 ct

Starting at: £51.20

Yellow Gold Leaf 22 ct, 80 x 80 mm. Book of 25 leaves. Coverage per book is 0.16 m2 (1.69 sq. feet) Learn More

Cornelissen Silver Foil Leaf-Single

£13.00

Cornelissen Silver Foil Leaf-Single Learn More

Roberson Liquid Metal 5Ltr

Starting at: £255.80

Call to Order

5 Litre containers are not available in the shop, but only as a special order through the website or over the telephone. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Chinese Gold 24 ct

3 Review(s) | Add Your Review

Starting at: £39.50

Chinese Gold 24 ct Learn More

Cornelissen 80 Platinum Leaf

Starting at: £71.25

Platinum Leaf, 80 x 80 mm. Book of 25 leaves. Coverage per book is 0.16 m2 (1.69 sq. feet) Learn More

Roberson Liquid Metal 500ml

Starting at: £34.20

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. This range of paints is suitable for exterior use but must be applied on a dry day as acrylics take longer to dry out completely than oil-based paints. Once dry the paints cure and are hardwearing. Learn More

Seccotine 30 ml

£8.50

Refined liquid fish glue for use as a size for gilding on paper. It can also be used as a glue for paper and as a binder in gesso for raised illumination. Seccotine is made from the skin of the Atlantic deep sea cod fish. It remains flexible after drying.

Learn More

Cornelissen 80 Renaissance Gold 22.5 ct

Starting at: £59.20

Renaissance Gold 22.5 ct, 80 x 80 mm. Book of 25 leaves. Coverage per book is 0.16 m2 (1.69 sq. feet) Learn More

Roberson Liquid Metal 30ml

Starting at: £7.20

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Search results for '10'