Search results for: 'in'

Japanese Classic Tool Set in Wooden Case

£34.00

Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing. Learn More

Hing Clamps (per pair)

£16.00

Hinge clamps, these are zinc plated aluminium clamps for attaching screens to any surface to create printing bed. Clamp surface is 60mm wide, and will securely hold a frame depth of min: 12mm and max: 45mm. The clamps have counter sunk screw holes 6mm diameter and 30mm a part (centres). Clamp opens up to 90 degrees. Learn More

Miniature Table Presses

Starting at: £311.80

Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More

Aluminium Ready Stretched Screen

Starting at: £39.00

Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More

Aluminium Coating Trough 18" with ends

£31.00

Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More

Artools Easy-Grip Crible Point, Squat, No. 94

£15.76

Artools Easy-Grip Crible Point, Squat, No. 94. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Screen Cleaning Brush

£9.00

Cleaning brush. Abrasive cleaning pad for cleaning, degreasing and reclaiming screens. This brush is safe on all mesh types. Learn More

Artools Easy-Grip Crible Point, Sharp, No. 93

£15.76

Artools Easy-Grip Crible Point, Sharp, No. 93 A traditional crible point for creating indentations in the plate. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Total length: 12 cm. Learn More

Cornelissen Lino Set with 5 Blades

£12.70

Wooden handle with 5 interchangeable blades. The blades are pushed into the handle, and removed using the dowel included. The blades are made from hardened cutting steel. Includes: - 1 x V-shape; - 1 x fine U-shape; - 1 x medium U-shape; - 1 x wide U-shape; - 1 x knife blade. Replacement blades are available for this set. Learn More

Artools Drypoint Needle, Long Handle, No. 46P

£10.45

Drypoint Needle, Long Handle, No. 46P Learn More

Artools Tempered Steel Drypoint Needle, No. 49A

£15.76

Artools Tempered Steel Drypoint Needle, No. 49A Learn More

Artools, Roulette, Fine, Crossed Lines, No. 14

£13.20

Artools, Roulette, Fine, Crossed Lines, No. 14 Learn More

Carborundum Powder

Starting at: £11.50

Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More

Essdee Complete Linocut Set

£43.40

A comprehensive kit with a wide selection of tools and materials for Lino cutting and printing. Compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren tool transfers ink from the lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. Water based ink. Educational and fun, ideal for making cards, posters and artworks. Full instructions included. Recommended Age: 12+ with adult supervision. Includes: 5 x Lino Cutters; 1 x Safety Lino Cutter; 1 x Lino Cutter Handle; 1 x Aluminium Ferrule; 2 x Linoleum Blocks 178x127 mm; 2 x Softcut Blocks 150x100 mm; 1 x Practice Piece; 1 x Ink Roller (Brayer) 100 mm Wide; 1 x Ink Tray 240x200 mm; 1 x Safety Hand Guard; 1 x Baren Cap; 1 x Baren Base; 1 x 100ml Tube Premium Water-Based Block Printing Ink; 2 x 45mm Printing Stamps. Learn More

Japanese Easy Grip Tento Carving Set

£21.00

Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More

Artools Roulette, Crossed Lines, Mushroom Handle, No. 6C

£18.76

Artools Roulette, Crossed Lines, Mushroom Handle, No. 6C Learn More

Artools Roulette, Coarse, Crossed Lines, No. 7

£13.20

Artools Roulette, Coarse, Crossed Lines, No. 7 Learn More

Artools Wood & Felt Baren for Relief Printmaking

£6.45

Artools Wood & Felt Baren for Relief Printmaking Learn More

Artools Roulette, Medium, Crossed Lines, No. 1

£13.20

Artools Roulette, Medium, Crossed Lines, No. 1 Learn More

Cornelissen T52100B Professional Press

1 Review(s) | Add Your Review

£2,150.00

Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

Learn More

Hangito 3mm (Right Handed)

£28.00

The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More

Sosaku Brush 60mm

£18.60

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Crocus Powder

Starting at: £12.00

A red amorphous powder consisting of ferric chloride oxide. Used as a colourant for ceramic glazes. Also used in polishing glass, metal, or gems. Also known as jeweller's rouge. Learn More

Sosaku Brush 15mm

£6.50

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Superior Medium Soft Rubber Rollers

Starting at: £133.20

Medium/Soft Superior NBR Rubber Rollers available in 3 different width and 60mm diameter. Suitable for all fine printmaking applications including wood engraving, lino cut and wood cut. Solid metal handle. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Traditional Japanese Sumi Baren

£46.50

Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Cornelissen T52100 Professional Press

£3,250.00

Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.

Learn More

Search results for 'in'