Search results for: 'a'

Aisuki 3mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Easy Grip Crible Point Squat No 94

£15.76

Easy Grip Crible Point Squat #94 Heavy duty tool with tapered shaft ending in a point Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Aluminium Coating Trough 18" with ends

£31.00

Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Gamblin Relief Printing Inks 175ml

Starting at: £16.00

Gamblin Relief Inks are formulated for all relief techniques, including woodblock, linocut, monotype, and Solarplate. They contain the right amount of stiffness and tack to hold fine detail yet spread evenly on the block or plate. The palette of ten colors is designed to give artists intense pure pigmented colors straight from the jar, along with a wide range of color mixing capabilities. Gamblin Relief Inks are all bound in the highest quality Burnt Plate Oil. Learn More

Aluminium Ready Stretched Screen

Starting at: £39.00

Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More

Aisuki 4.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Gamblin Portland Black Litho Ink 1lb

£25.00

Artist-grade lithography ink, formulated with high-quality oil and a high pigment load. Learn More

Gamblin Etching Inks 300ml

Starting at: £20.90

Gamblin Etching Inks were formulated at the request of professional printmakers in the Pacific Northwest who wanted strong reliable inks for edition printing. The palette of pure intense pigments offers a broad range of color mixing potential. Learn More

Aisuki 1.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Easy Grip Crible Point Sharp No 93

£15.76

Easy Grip Crible Point Sharp #93 A traditional crible point for creating indentations in the plate. 120mm length dot. -Heavy duty tool with tapered shaft ending in a small dot -Tempered steel Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Gamblin Textile Black Relief Ink 1lb

£25.00

For block printing on t-shirt and cotton fabric Intense, rich black Designed for even coverage Fast drying No fillers, additives or modifiers Colourfast Learn More

Carborundum Powder

Starting at: £11.50

Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More

Gamblin Tom Huck's Outlaw Black Relief Ink 1 lb

£25.00

Relief printing cool black for highly detailed woodblock printing on paper. Stiff bodied, cool black Intense ink for fine detail Pure burnt plate linseed oil base No fillers, additives, or modifiers Learn More

Aqua Wash Oil

£13.70

Charbonnel Aqua Wash Etching Ink Oil 75 ml Learn More

Tallow

Starting at: £34.60

Used in printmaking. Imparts softness and greasiness. An ingredient for producing soft etching ground. Learn More

Charbonnel Blacks

Starting at: £18.60

Charbonnel Blacks Learn More

Lascaux Coloured coating for Hard Resist

Starting at: £38.70

These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More

Lascaux Hard Resist 500ml

£45.60

This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More

Lascaux Screen Filler 500ml

£47.70

The Lascaux Screen filler and Lascaux Screen painting fluid may be used for painting directly on the mesh as part of a waterbased screenprinting system. These products work harmoniously with Lascaux Screenprinting paste and the Lascaux Colours. Learn More

Lascaux Stop-Out Resist 500ml

£45.60

Stop-out resist may be painted thickly on a smooth substrate to generate a contour lines. The resists can be used to seal collagraph plates when necessary (e.g. absorbent substrates or carborundum plates). Learn More

Charbonnel Aqua Wash Blacks

Starting at: £13.20

Charbonnel Aqua Wash Blacks Learn More

Caligo Safe Wash Etching Inks

Starting at: £8.00

Oil-based and washable - Artist quality etching inks for non-toxic printmaking. Solvent-free cleaning and lightfast, this unique range of etching inks can be washed away with liquid soap and water. Suitable for all types of intaglio printing e.g. etching, aquatint and line engraving. This range does not contain any driers. For faster drying rates, add a small amount of cobalt or manganese driers.

Learn More

Hangito 3mm (Right Handed)

£28.00

The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More

Japanese Easy Grip Tento Carving Set

£21.00

Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More

Lascaux Tusche Lift Solution 500ml

£36.50

The Lascaux Tusches are a unique range of innovative ready-to-use water-soluble painting materials specially designed for creating positives for light-sensitive printmaking processes. The positives can be used with water-based screenprinting, acrylic-resist etching, solar plate printing and traditional printmaking methods. The Lascaux Lift solution can be used in conjunction with Lascaux Tusche spray for making positives or as a lift in the acrylic-resist etching system. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lascaux Tusche Waterproof 500ml

£42.90

Fast drying, waterproof and scuff resistant, this semi-viscous tusche has homogeneous covering power and is useful for a broad range of painted marks. The diluted tusche dries to resemble ‘toad-skin’ washes usually found in zinc-plate lithography. Learn More

Lascaux Remover 1L

£44.20

Dried resists are removed by immersing the plate in a tray or tank of Lascaux Remover for 15 to 30 minutes. * UK ONLY Learn More

Lascaux Tusche Water-Soluble

£39.90

This viscous tusche can be painted in a smooth even layer which can be scratched away to create delicate non-printing lines. It can also be used for a broad range of painted marks, offsetting and pattern-making. The diluted tusche dries to create granular washes that are full of character. Dry marks can be re-wet and altered if required. 500ml. Learn More

Search results for 'a'