Search results for: 'st ar'

Soft Rubber Lino Rollers

Starting at: £11.00

A soft compound EPDM at 40 shore. Resistant to printers chemicals and not affected by exposure to daylight, this is a long life product. This brayer is designed to give a more compliant coverage than hard rubber material. More forgiving on uneven surfaces, proving to be a favourite with certain printing methods but needing extra care in storage to prevent indentation to its soft surface. Especially developed for relief printing. Learn More

Aisuki 1.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lascaux Tusche Wash 500ml

£42.90

This Tusche has handling qualities similar to ink and can be diluted to make gradated washes typical of stone lithography. By scratching into the dry marks, delicate non-printing lines can be created. Learn More

Sankaku-toh 4.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Caligo Safe Wash Relief Inks

Starting at: £7.80

Oil-based inks that wash away safely with liquid soap and water. Suitable for all types of relief or block printing, such as woodcut and wood engraving, letterpress and linocut. This range contains less than 1% of driers. For faster drying rates, add a small amount of cobalt or manganese driers. Formulated with excellent light fast pigments for non-toxic printmaking or solvent-free cleaning.

Learn More

Aluminium Coating Trough 18" with ends

£31.00

Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More

Komasuki 6mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 1.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Cornelissen T52100 Professional Press

£3,250.00

Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.

Learn More

Komasuki 1.5mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Drum-Wheel Roulette

Starting at: £54.00

Wheel with a straight shaft for fine, medium and coarse parallel and cross lines. Learn More

Lino Set with 5 Cutters

£12.70

Wooden handle with 5 blades. The blades are pushed into the handle, and removed by using the dowel. The blades are made from hardened steel. The set contains 1 x V blade, 3 x U blades and 1 straight blade. Replacement blades are available for this set. Learn More

Deburring Plate Tool

£13.00

Specially designed swivelling blade will quickly remove sharp edges from copper, zinc and plastic plates to create a light bevelled edge. Learn More

Sosaku Brush 24mm

£11.15

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Miniature Table Presses

Starting at: £311.80

Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More

Lascaux Tusche Diluting Liquid 500ml

£36.50

A ready-to-use liquid for diluting Lascaux Tusches to alter their handling characteristics or to create delicate washes on positives. Learn More

Aisuki 3mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lascaux Tusche Waterproof 500ml

£42.90

Fast drying, waterproof and scuff resistant, this semi-viscous tusche has homogeneous covering power and is useful for a broad range of painted marks. The diluted tusche dries to resemble ‘toad-skin’ washes usually found in zinc-plate lithography. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Intaglio Etching Set

£91.25

The selection covers the basic tools for traditional etching as well as copper and wood engraving. The set consist of small curved burnisher, twisted double needle, scraper and fine, medium and large burin square engraving tools. Learn More

Lascaux Screen Filler 500ml

£47.70

The Lascaux Screen filler and Lascaux Screen painting fluid may be used for painting directly on the mesh as part of a waterbased screenprinting system. These products work harmoniously with Lascaux Screenprinting paste and the Lascaux Colours. Learn More

Cornelissen Lithography Sponge, Compressed

£6.50

Cornelissen Lithography Sponge, Compressed. Designed to keep the litho stone wet during printing. It can be used for preparing printmaking or watercolour paper. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Rohrer & Klingner Lithographic Inks

Starting at: £17.10

Liquid lithographic ink and solid (tushe) lithographic ink are highly resistant against acids and can be used to draw on stone, aluminium and zinc plates. Uses a highly dispersed pigment that is compounded from shellac, wax and soap. While the liquid ink is suited for complete covering, the tushe ink is excellent for halftones and transitions. * Please note that the Litho Tusche now comes in a cylindrical shape, rather than the rectangular stick photographed. Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Gamblin Tom Huck's Outlaw Black Relief Ink 1 lb

£25.00

Relief printing cool black for highly detailed woodblock printing on paper. Stiff bodied, cool black Intense ink for fine detail Pure burnt plate linseed oil base No fillers, additives, or modifiers Learn More

Wood Cut Set

£103.05

Set of five tools and a sharpening stone. Bent chisel, Knife, Straight chisel, V shape gouge, Medium gouge and stone. Learn More

Sosaku Brush 60mm

£18.60

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Komasuki 1mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Search results for 'st ar'