Search results for 'st ar'
-
Easy Grip Crible Point Sharp No 93
£15.76Easy Grip Crible Point Sharp #93 A traditional crible point for creating indentations in the plate. 120mm length dot. -Heavy duty tool with tapered shaft ending in a small dot -Tempered steel Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More -
Traditional Sumi Baren
£46.50Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More -
Lascaux Etching Set ARE
£103.40Lascaux ARE Etching Set 3991. Containing one 85ml bottle each of: 2090 Lascaux Hard Resist, 2091 Lascaux Plate-backing Resist, 2092 Lascaux Stop-out Resist, 2093 Lascaux Soft Resist, 2094 Lascaux Wash Resist, 2095 Lascaux Aquatint Spray Resist, 2096 Lascaux Black coating for Hard Resist, 2097 Lascaux White coating for Hard Resist, 2098 Lascaux Remover. Learn More -
Lascaux Wash Resist 500ml
£38.70This coloured granular resist is painted on the plate and used in conjunction with Lascaux Spray/aquatint to create unusual etched effects similar to watercolour or tusche washes. Learn More -
-
Lascaux Stop-Out Resist 500ml
£45.60Stop-out resist may be painted thickly on a smooth substrate to generate a contour lines. The resists can be used to seal collagraph plates when necessary (e.g. absorbent substrates or carborundum plates). Learn More -
Charbonnel Black Soft Crayon Ink
Starting at: £39.10
Least intense black printing ink for lithography. Learn More -
-
-
Lascaux Studio Acrylic Colours 250ml
Starting at: £25.70
Great quality acrylic paints ideal to use in silkscreen printing. Mix the colours undiluted to obtain the desired hue and then add the Lascaux Screenprinting Paste. It is advisable to experiment initially, to determine satisfactory working mixes. To find a satisfactory working ratio, it is useful to first print colours using a 50/50 mixture of undiluted colour to paste and to then shift the ratio depending on the results. *Please note, this range is stored offsite. Please allow extra time for your order to be processed and dispatched. Learn More -
-
-
Charbonnel Aqua Wash Colours
Starting at: £10.70
Water-washable inks with oil emulsion suitable for Intaglio printing including etching, drypoint, aquatint, monoprint and mezzotint. Learn More -
-
Carborundum Powder
Starting at: £11.50
Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More -
-
Stencil Strip 500ml
£10.00Stencil strip, this is a concentrated organic emulsifying stripper that is made using natural mineral salts. It quickly removes all stencil emulsions and capillary films. Can be diluted up to 1:10 with water. Always wear gloves and avoid contact with eyes. Learn More -
Gamblin Etching Inks 300ml
Starting at: £20.90
Gamblin Etching Inks were formulated at the request of professional printmakers in the Pacific Northwest who wanted strong reliable inks for edition printing. The palette of pure intense pigments offers a broad range of color mixing potential. Learn More -
Lascaux Coloured coating for Hard Resist
Starting at: £38.70
These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More -
Roberson Rhinds Stopping Out Varnish
Starting at: £8.60
Traditional strongly resistant SOV. Very dark and opaque finish. Appropriate for backing the plate as well as stopping out areas. Learn More -
Lascaux Hard Resist 500ml
£45.60This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More -
Roberson Straw Hat Varnish
Starting at: £37.50
Varnish (Black Dark) Meths based quick drying stopping out varnish, two coats may be needed for a good acid resist. Learn More -
Pfeil Arkansas Stone Set of 4
£65.00Pfeil's Arkansas Stones are sharpening stones made for honing cutting edges such as lino cutting tools and etching tools. Genuine Arkansas stones are among the hardest and finest of honing stones. Use with special light honing oil. Colors range from white to black. Grit: ca. 8000 Size: ca. 65mm x 25mm x 8mm Learn More -
Plastic Baren
£7.30Plastic Baren. This is a hard plastic baren 120mm across with dimples over the printing surface. There is no need for a bamboo covering for this baren as with the traditional style and has more durability then the traditional baren due to this. Perfect for those starting mokuhanga. Learn More -
-
-
-
Asphaltum Powder
Starting at: £14.30
Call to Order
Used in etching grounds and stopping out varnishes. Can be used as a blackish brown colourant but when combined with oil causes wrinkling and cracking. Learn More -
Ferric Chloride
Starting at: £15.00
Call to Order
For the etching of plates for printing fine art images in intaglio. Ferric Chloride can be used as an alternative to nitric acid in the etching process. Suitable for etching most types of metals including copper, zinc, mild steel, aluminium, iron and brass.PERMITTED USES Over 18s only. Proof of age required. Restoration of art works and protected buildings when alternatives are unsuitable.
IMPORTANT Please refer to the MSDS (Material Safety Data Sheet) below. Dispose of product as hazardous waste.
SHIPPING Please note, we are not able to send this product outside the UK. Learn More
-
Gamblin Burnt Plate Oils
Starting at: £10.50
Call to Order
Burnt Plate Oils are used to lower the viscosity of the ink. Burnt Plate Oil should be added to inks sparingly, as the detail of a print may be lost if the ink becomes too fluid. Burnt Plate Oil #000 has less tack and is a good match for use with Gamblin Relief Inks. Burnt Plate Oil #2 has a higher tack and is the primary oil binder for Gamblin Etching Inks. Learn More
Currently Shopping by:
- Category: Printmaking Remove This Item
Shopping Options
- Category
-
- Charbonnel Intaglio Etching Inks (4)
- Charbonnel Aqua Wash Inks (1)
- Etching Inks (3)
- Etching Grounds (2)
- Etching Needles and Scrapers (3)
- Combination Tools (1)
- Roulettes and Mezzotint Tools (2)
- Lino Cutters and Engraving Tools (4)
- Printmaking Sets (10)
- Screen Printing (11)
- Rollers (3)
- Etching Plates (1)
- Printmaking Accessories (5)
- Raw Materials for Printmaking (4)
- Lithography Materials (12)
- Relief Printing Inks and Mediums (3)
- Japanese Woodcut (23)
- Etching Presses (5)
- Lascaux Acrylic-resist etching (7)
- Price
-
- £0.00 - £999.99 (89)
- £2,000.00 - £2,999.99 (1)
- £3,000.00 and above (2)
- Manufacturer
-
- Charbonnel (9)
- Cornelissen (40)
- Gamblin (5)
- Korns (2)
- Lascaux (14)
- Pfeil (4)
- Roberson (4)
- Rohrer and Klingner (3)
- Schmincke (1)
- Spectrum (2)
You have no items in your shopping basket.
- Search Brands
-