Search results for 'tools'

Unique silicone tipped tools for painting heavy mediums such as acrylic and oil paint. Excellent for spreading adhesives and appplying masking fluid. Can be used with Batik and encaustic wax. Available in soft ivory tip and firm grey tip. Learn More

Miniatum size in ink form, for raised calligraphic illumination and fine lines in gold and silver leaf. Miniatum Ink can create high gloss gilding on paper, vellum (degreased), leather and flexible surfaces such as plastic foils. The elastic nature of the size assures a long-lasting gilded surface *Please note - Colours of these products may vary slightly from those depicted in the photograph* Learn More

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Drawing gum for masking specific areas which should remain white on water-colour paper, smooth drawing carton, photographs or films. Apply with writing pen, cotton bud or wooden stick. Contains: synthetic resin dispersion without ammonia. Learn More

Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More

Shell gold, so named because it was historically made and stored in a shallow shell such as a mussel shell, consists of finely powdered genuine gold mixed with a variety of gums. It is mixed with a bit of water and applied in the same way as watercolour. After drying for an hour or so, it can be burnished to a soft, beautiful lustre using an agate stone burnishing tool.
Our Shell gold is used by calligraphers, framers, restorers, iconographers and watercolour artists.
In recent years our colour range of genuine gold has been extended and genuine Lapis Lazuli and genuine Malachite have also been added. Learn More

Writing Ink (series 40). Dye based inks suitable for fountain pens and many other calligraphy tools. Not waterproof or lightfast. The range of 18 shades includes two Iron Gall inks modified from a traditional recipe to be suitable for fountain pens. The Iron Gall inks are lightfast, deepen in colour with oxidisation over time and are permanent. All colours, with the exception of Sepia, are intermixable. Learn More

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Professional six-tool intaglio set, including the following E C Lyons instruments for traditional etching as well as copper and wood engraving: - Small Curved Burnisher; - Twisted Double Needle; - Small Scraper; - Burin Square No. 4; - Burin Square No. 5; - Elliptic Tint Tool No. 3. Learn More

From the Schmincke website:

Jelly-like medium for accelerating the drying of oil colours. Preserves consistency and degree of gloss. Dosage: 10% to 30% maximum. Contains: Siccative, stand oil, resin solution, mineral spirit.

Learn More

Specially designed swivelling blade will quickly remove sharp edges from copper, zinc, aluminium, and plastic plates to create a light bevelled edge. Learn More

Essdee Linocut Tool Sets. Five or ten varied blades that can easily be secured into and removed from a comfortable handle. Learn More

Biodegradable Learn More

Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet. Learn More

Professional six-tool wood and copper engraving set, including the following E C Lyons gravers: - Lozenge Graver No. 5; - Flat Graver No. 40; - Flat Graver No. 46; - Round Graver No. 54; - Round Graver No. 60; - Point Graver No. 3. Learn More

Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing. Learn More

Japanese shell gold in ceramic pans.

Shell gold, so named because it was historically made and stored in shallow shells such as mussel shells, consists of finely powdered genuine gold mixed with a variety of gums. This Japanese shell gold range is made using the highest quality handmade Japanese gold and precious metal powders bound with Nikawa gelatine glue.

Mix with a bit of water and apply in the same way as watercolour (a drop of oxgall can be added to break the surface tension) After drying, it can be burnished to a soft, beautiful lustre using an agate stone burnishing tool.
Contains 0.4g Learn More

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Professional sharpening stones used to hone each blade's cutting power on a variety of different printmaking tools. The Slip Stone is coarse whilst the Arkansas Stone has a very finely abrasive surface, perfect for carefully restoring a dull cutting instrument to its former brightness. These stones can be used to best advantage with a little honing oil. Learn More

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Twisted double-ended drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 17 cm. Learn More

Complete Mokuhanga set for beginners. This set includes; 1x Sosaku inking brush 15mm, 1x Tokibo carrying brush for glue, 5pcs pencil style carving tools in a plastic case including; 7mm Aisuki (flat), 10mm Hangi-toh (knife), 3mm Komasuki (U), 3mm Sankatu-toh (V), 6mm Asamaru (shallow U), 1x plastic inking dish, 1x plastic baren 120mm, 1x shina plywood 160mm x 110mm, 1 x pack of 4 colours of waterbased printing in premixed with glue paste. Learn More

This slow drying viscous tusche has been designed to produce effects similar to soft ground in traditional etching. Using this method soft non-printing drawings may be made and impressions of fabric, leaves, feathers and other collage materials may be taken. The tusche can also be used for a broad range of painted marks and can be drawn into with paint shapers and other tools. The diluted tusche dries to creategranular washes. Dry marks can be re-wet and altered. Learn More

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Each Hazel shaft used in the creation of our Mahl poles is individually selected for straightness and overall appearance before being dried and prepared. We use hazel for strength, weight, and the appearance of its rich brown bark when linseed is applied.

Our pommels and handles are made from a stock of fine Italian leather, used for its durability and flex during assembly.

"Georgeson and Son established in 2012 with a singular aim. To resurrect and manufacture forgotten Artist's tools by hand, as carefully and as beautifully as possible.
  A desire to make useful things that will last underpins all that we do. We use only the finest quality materials, sustainably sourced and refuse to compromise this quality for the sake of profitability."

Learn More

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Small, ball-shaped tool for detailed burnishing, polishing and corrections. Total length: 14.5 cm. Learn More

This product does not contain turpentine, and is therefore suitable for artists with allergies. A 'neutral', nearly non-yellowing painting and thinning medium for oil colours. Applicable for all painting techniques except for ground motifs on slightly absorbent undergrounds (not “lean” enough). Low impact on drying time. Thinner: Terpin (50023) (max. 30%). Dosage: 10 to max. 20%. Learn More

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More