Click to Hide Notification

Search results for 'Mediums'

Items 31 to 41 of 41 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Roberson Matt Medium

    Roberson Matt Medium

    Starting at: £13.50

    Roberson's Matt Medium creates a dead-flat finish when mixed with oil colour. It aids the flow and increases the artist's control of oil paint, allowing for smooth application flat brush marks with low edges. It can be mixed with oil paint in any ratio. Learn More
  2. Roberson Turks Aquarella

    Roberson Turks Aquarella

    Starting at: £21.50

    For watercolour painting on paper, ivorine, terracotta, wood and fabric. Sizing not needed. Prevents the running of colours, even on open weave fabrics. Learn More
  3. Roberson Ormoline Medium

    Roberson Ormoline Medium

    Starting at: £8.70

    Mix with Roberson Standard Bronze Powders to create metallic paint. 25g powder will make 125ml of paint. Learn More
  4. Liquid Leaf Brush Bath Thinner and Cleaner

    Liquid Leaf Brush Bath Thinner and Cleaner

    Starting at: £9.90

    Brush Bath is a paint thinner and solvent especially formulated for the thinning or cleaning of Liquid Leaf. For spray application, use 15-20% Brush Bath with Liquid Leaf. For cleaning, apply to a soft cloth and wipe affected area. For thinning, mix a small amount of Brush Bath with Liquid Leaf, stirring or shaking container until desired consitency. To clean brushes, pour Brush Bath into a small container and let brushes soak.

    Learn More
  5. Roberson 1810 Medium

    Roberson 1810 Medium

    Starting at: £34.20

    This is a traditional, high-oil "fat" painting medium, made using the highest quality materials. It will retain colour strength, is resistant to bleeding, has good flow release, is ideal for blending, and can be mixed with oil colours in any ratio. When dry, it creates an enamel-like surface.

    Contains: Stand oil, Cold-pressed Linseed oil, Canada Balsam, Rectified Spirit of Turpentine, Beeswax, Driers.

    Clean tools in white spirit. Do not use as a varnish, always mix with oil colour.

    Learn More
  6.  Liquid Metal Colour Chart

    Roberson Liquid Metal Colour Chart Hand Made

    £11.00

    Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are inter-mixable. This is a double sided and hand painted colour chart of the full range. Learn More

  7. Roberson PVA

    Roberson PVA

    Starting at: £12.60

    PVA mixes with pigments to make glossy acrylic colours or an easy colour wash for walls. Also suitable as an adhesive. Learn More
  8. Roberson Liquid Metal 1Ltr

    Roberson Liquid Metal 1Ltr

    Starting at: £60.30

    Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More
  9. Roberson Cobalt Siccative

    Roberson Cobalt Siccative

    Starting at: £7.70

    A cobalt drier in white spirit, to be added sparingly to oil colours to accelerate drying. Learn More
  10. Roberson Satin Glaze Medium

    Roberson Satin Glaze Medium

    Starting at: £9.80

    Mix with tube oil colours or pigment to improve flow and translucency. For thin glazes, fine details and smooth brushwork. Learn More
  11. Roberson Liquid Metal 250ml

    Roberson Liquid Metal 250ml

    Starting at: £18.90

    Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Items 31 to 41 of 41 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction