Search results for: 'brushes '

Roberson Satin Glaze Medium

Starting at: £9.80

Mix with tube oil colours or pigment to improve flow and translucency. For thin glazes, fine details and smooth brushwork. Learn More

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Roberson Matt Medium

Starting at: £13.50

Roberson's Matt Medium creates a dead-flat finish when mixed with oil colour. It aids the flow and increases the artist's control of oil paint, allowing for smooth application flat brush marks with low edges. It can be mixed with oil paint in any ratio. Learn More

Roberson Glaze Medium

Starting at: £9.60

Mix with tube oil colours or pigment to improve flow and translucency. For thin glazes, fine details and smooth brushwork.

Contains: Turpentine, Damar Resin, Stand Oil, Cobalt Dryers.

Learn More

Roberson Clear Shellac Varnish

1 Review(s) | Add Your Review

Starting at: £11.50

Fast drying varnish for metal leaf. May also be used to seal absorbent surfaces prior to sizing. Cellulose based. Clean brushes with methylated spirits. Learn More

Roberson Liquid Metal Acrylic Inks

Starting at: £6.70

Roberson extra fine Liquid Metal Inks for calligaphy and drawing. Apply with dip pen or brush, can be thinned with water if required and will not tarnish. Not suitable for fountain pens or technical drawing pens. Waterproof. Learn More

Roberson Linseed Stand Oil

Starting at: £10.50

Linseed Oil is derived from flax seeds, and appears on our shelves in many guises: Cold Pressed, Refined, Stand Oil, and as a key ingredient in many mediums. It has been appreciated for its drying properties since the Medieval period, and has become the most popular oil used in painting today due to the strong, flexible and glossy film that it creates.

Stand Oil is paler and more viscous than other Linseed Oils, having been heated and kept at temperature to provoke a molecular change. It is not suitable for grinding colours, but it is a very versatile ingredient that can be thinned with turpentine to create a glazing medium or be included in a varnish. Stand Oil is notable for its ability to smooth out brush strokes to create an enamel-like surface.

Learn More

Roberson A81 Varnish

Starting at: £8.50

Roberson A81 Picture Varnish A reversible picture varnish suitable for both specialist conservation work and general picture varnish needs. Non-yellowing, dries to a gloss finish. Cleaning: Wash brushes in turpentine Learn More

Roberson Liquid Metal 1Ltr

Starting at: £60.30

Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Roberson Interlon Series 64 Filbert

Starting at: £5.60

Call to Order

Made with new improved brown interlocking tapered filaments, these brushes have an excellent shape retention and firm texture. Good spring. Gold colour ferrule with bottle green handle. *AWAITING ARRIVAL OF NEW STOCK* Learn More

Search results for 'brushes '