Oils and Acrylics
-
Studio Safe Gloss Picture Varnish
Starting at: £17.90
Studio Safe Gloss Picture Varnish. Dries to a gloss finish Learn More -
Winsor & Newton Artists' Satin Varnish
Starting at: £9.20
Winsor & Newton Artists' Satin Varnish Learn More -
Talens Retouching Varnish Aerosol
Starting at: £19.95
Aerosol varnish for oil colour. Temporary protective coat. Use as soon as painting is touch dry. Unable to send overseas. Learn More -
Talens Acrylic Picture Varnishes Aerosol
Starting at: £19.25
Aerosol varnish for oil or acrylic paintings. Gloss or Matt finishes. Unable to send overseas. Learn More -
Maimeri Retouching Varnish Aerosol
Starting at: £14.95
Aerosol varnish for oil or acrylic paintings. For use as temporary varnish for paintings less than 6 months old. Unable to send overseas. Learn More -
Talens Picture Varnishes Aerosol
Starting at: £19.95
Aerosol varnish for oil paintings. Gloss or Matt finishes. Unable to send overseas. Learn More -
Roberson PVA
Starting at: £12.60
PVA mixes with pigments to make glossy acrylic colours or an easy colour wash for walls. Also suitable as an adhesive. Learn More -
Roberson Acrylic Gloss Medium
Starting at: £11.20
(Copolymer emulsion) add to pigment to make acrylics. May also be added to prepared acrylic colours to extent them and increase gloss. Learn More -
-
Liquitex Acrylic Slow-Dri Blending Gel
Starting at: £20.40
Liquitex Acrylic Slow-Dri Blending Gel Learn More -
Liquitex Acrylic Matte Gel Medium
Starting at: £20.40
Adds texture and creates matte colour. Learn More -
Liquitex Acrylic Gloss Gel Medium
Starting at: £20.40
Adds texture. Increases colour brilliance & transparency. Use for thick glazes. Learn More -
Liquitex Acrylic Matte Medium
Starting at: £20.40
Decreases gloss. Can be used as sealer for canvas etc. Learn More -
Liquitex Acrylic Gloss Medium and Varnish
Starting at: £20.40
Liquitex Acrylic Gloss Medium and Varnish Learn More -
Liquitex Acrylic Ultra Matte Medium
Starting at: £20.40
Liquitex Acrylic Ultra Matte Medium Learn More -
Liquitex Acrylic Glazing Medium
Starting at: £20.40
Creates brilliant glazes when mixed with transparent colour. Excellent brushing and self-leveling qualities. Dries quickly for rapid layering. Learn More -
Liquitex Acrylic Fabric Medium
Starting at: £12.35
Enhances blending, workability, and adhesion of acrylic colours for painting acrylics directly on to fabric. Reduces paint stiffness. No heat setting required. Learn More -
Liquitex Acrylic Modeling Paste Medium
Starting at: £20.20
Creates dense texture which can be sanded or carved. Also available in Flexible or Light consistencies. Learn More -
-
Liquitex Acrylic Textured and Effects Mediums
Starting at: £20.40
Liquitex Acrylic Textured and Effects Mediums Learn More -
-
Liquitex Acrylic Slow-Dri Retarder
Starting at: £12.35
Increases drying and blending time. Reduces skinning on palette. Use for wet-in-wet techniques. Learn More -
Liquitex Acrylic Iridescent Tinting Medium
Starting at: £20.40
Creates iridescent colours and glazes. Learn More -
Liquitex Acrylic Gloss Heavy Gel Medium
Starting at: £20.40
Liquitex Acrylic Gloss Heavy Gel Medium Learn More -
Roberson Liquid Metal 5Ltr
Starting at: £255.80
Call to Order
5 Litre containers are not available in the shop, but only as a special order through the website or over the telephone. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 1Ltr
Starting at: £60.30
Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 500ml
Starting at: £34.20
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. This range of paints is suitable for exterior use but must be applied on a dry day as acrylics take longer to dry out completely than oil-based paints. Once dry the paints cure and are hardwearing. Learn More -
Roberson Liquid Metal 250ml
Starting at: £18.90
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 30ml
Starting at: £7.20
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Schmincke Akademie Acrylic 2.5L Tit. White
£80.25Schmincke Akademie Acrylic 2.5L Titanium White Series 1. *Please note, this product is stored offsite. Please allow extra time for your order to be processed and dispatched. Learn More
You have no items in your shopping basket.
