Printmaking
-
-
-
Artools Twisted Double-Ended Needle / Scraper, No. 47
£16.70Artools Twisted Double-Ended Needle / Scraper, No. 47 Learn More -
Friedr. Dick Hollow Burnisher and Scraper
£91.90Hollow Burnisher and Scraper. Total length: 19 cm. Learn More -
Friedr. Dick Scriber and Light Burnisher
£52.80Scriber and Light Burnisher. Total length: 14 cm. Learn More -
Lyons Needle Point and Burnisher
£20.60Twisted steel handle with straight burnisher on one side and drypoint needle/scriber on the other. Made of high-carbon tool-steel. Total length is 17.75 cm. Learn More -
-
Lyons Burnisher and Scraper
£28.00Combined triangular scraper and curved burnisher made of high-carbon tool-steel. Total length is 17.75 cm. Learn More -
Lyons Curved Burnishers
Starting at: £15.65
Curved-tipped burnisher designed to flatten burrs, smoothen details, and polish the plate surface, for both image-making and correction purposes. The total length of the small burnisher is 14.5 cm, while the large measures 17.75 cm. Learn More -
Lyons Straight Burnishers
Starting at: £15.70
Straight-tipped burnisher designed to flatten burrs, smoothen details, and polish the plate surface, for both image-making and correction purposes. The total length of the small burnisher is 14.5 cm, while the large measures 17.75 cm. Learn More -
Lyons Ball Burnisher
£10.80Small, ball-shaped tool for detailed burnishing, polishing and corrections. Total length: 14.5 cm. Learn More -
-
-
-
Rohrer & Klingner Black Etching Ground Cap
£9.30Black etching ground in cap form consists of an easily meltable wax that is also solvable in spirits of turpentine. After being molten, the wax can be spread evenly over the plate with the help of a roller or a pad. Learn More -
Charbonnel Duroziez Retouching Ground
£32.90Charbonnel Duroziez Retouching Etching Ground 250 ml Learn More -
Rohrer & Klingner Transparent Ground Cap
£9.30Transparent etching ground in cap form is a light-coloured, transparent product for etching plates that already carry sketch which is meant to remain visible under the etching ground. Learn More -
Rohrer & Klingner Soft Ground 16g
£17.10Soft ground is a soft wax mixture for soft ground and cotton ground techniques. The warm ground plate gets coated with suet, which is then wiped off, leaving only a thin film. The soft ground is then applied on the warm plate and spread evenly with a small leather roller. Learn More -
Charbonnel Lamour Black
Starting at: £30.20
Bitumen, turpentine. Covering varnish with hard finish. Recommended for aquatint techniques. Learn More -
Charbonnel Lamour Black Satin
Starting at: £32.90
Bitumen, turpentine, quick drying petroleum, wax. Hard etching ground. Allows long etching time with no risk of scaling. Learn More -
Charbonnel Transparent Ground
£21.10Beeswax, pitch resin, turpentine. Retouching ground. Apply cold. Slow drying, lets previous etching show through. Learn More -
Charbonnel Liquid Siccative Varnish 75 ml
£11.60Charbonnel Etching Ground 75 ml Liquid Siccative Varnish. Beeswax, bitumen, ketone thinner. Liquid retouching ground which should be applied cold. Hard, with satin opaque finish. Learn More -
Charbonnel Ultraflex Liquid Ground
Starting at: £15.80
Judea bitumen, essence of turpentine, wax. Quick drying with transparent velvety finish. Apply cold with a supple brush. Learn More -
Roberson Rhinds Stopping Out Varnish
Starting at: £8.60
Traditional strongly resistant SOV. Very dark and opaque finish. Appropriate for backing the plate as well as stopping out areas. Learn More -
Roberson Straw Hat Varnish
Starting at: £37.50
Varnish (Black Dark) Meths based quick drying stopping out varnish, two coats may be needed for a good acid resist. Learn More -
Roberson Brunswick Black
Starting at: £14.10
White spirit-based slower drying alternative to SOV. Learn More -
Gamblin Etching Inks 300ml
Starting at: £20.90
Gamblin Etching Inks were formulated at the request of professional printmakers in the Pacific Northwest who wanted strong reliable inks for edition printing. The palette of pure intense pigments offers a broad range of color mixing potential. Learn More -
Gamblin Burnt Plate Oils
Starting at: £10.50
Call to Order
Burnt Plate Oils are used to lower the viscosity of the ink. Burnt Plate Oil should be added to inks sparingly, as the detail of a print may be lost if the ink becomes too fluid. Burnt Plate Oil #000 has less tack and is a good match for use with Gamblin Relief Inks. Burnt Plate Oil #2 has a higher tack and is the primary oil binder for Gamblin Etching Inks. Learn More -
Gamblin Tack Reducer 150ml
£11.50Small amounts added to ink will efficiently reduce tack. Learn More -
Artools Easy-Grip Crible Point, Squat, No. 94
£15.76Artools Easy-Grip Crible Point, Squat, No. 94. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More
You have no items in your shopping basket.
