Click to Hide Notification

  • Home /
  • Printmaking

Printmaking

Printmaking

Items 91 to 120 of 180 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Grid  List 

Set Descending Direction
  1. Sankaku-toh 3mm (V Shape)

    Sankaku-toh 3mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  2. Sankaku-toh 4.5mm (V Shape)

    Sankaku-toh 4.5mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  3. Sankaku-toh 6mm (V Shape)

    Sankaku-toh 6mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  4. Kentonomi

    Kentonomi

    £37.00

    Call to Order

    Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  5. Hangito 1.5mm (Right Handed)

    Hangito 1.5mm (Right Handed)

    £48.80

    Call to Order

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  6. Hangito 3mm (Right Handed)

    Hangito 3mm (Right Handed)

    £28.00

    Call to Order

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  7. Komasuki 1mm (U Shape)

    Komasuki 1mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  8. Komasuki 1.5mm (U Shape)

    Komasuki 1.5mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  9. Komasuki 3mm (U Shape)

    Komasuki 3mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  10. Komasuki 6mm (U Shape)

    Komasuki 6mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  11. Aisuki 1mm (Chisel Shape)

    Aisuki 1mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  12. Aisuki 1.5mm (Chisel Shape)

    Aisuki 1.5mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  13. Aisuki 3mm (Chisel Shape)

    Aisuki 3mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  14. Aisuki 4.5mm (Chisel Shape)

    Aisuki 4.5mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  15. Japanese Workbench

    Japanese Workbench

    £14.00

    Workbench/ Bench hook. An aid to safely carve plywood blocks or lino. Hook over edge of table or bench and place surface to be carved in corner as displayed. Please note workbench does not include plywood block. Learn More
  16. Lascaux Etching Set ARE

    Lascaux Etching Set ARE

    £103.40

    Lascaux ARE Etching Set 3991. Containing one 85ml bottle each of: 2090 Lascaux Hard Resist, 2091 Lascaux Plate-backing Resist, 2092 Lascaux Stop-out Resist, 2093 Lascaux Soft Resist, 2094 Lascaux Wash Resist, 2095 Lascaux Aquatint Spray Resist, 2096 Lascaux Black coating for Hard Resist, 2097 Lascaux White coating for Hard Resist, 2098 Lascaux Remover. Learn More
  17. Lascaux Aquatint Spray Resist 500ml

    Lascaux Aquatint Spray Resist 500ml

    £45.60

    Call to Order

    This coloured resist is sprayed onto the plate to create a range of controllable tonal effects. It may be used in conjunction with Lascaux Lift solution, other lift methods, stencils and Lascaux Wash resist. Learn More
  18. Lascaux Wash Resist 500ml

    Lascaux Wash Resist 500ml

    £38.70

    This coloured granular resist is painted on the plate and used in conjunction with Lascaux Spray/aquatint to create unusual etched effects similar to watercolour or tusche washes. Learn More
  19. Lascaux Stop-Out Resist 500ml

    Lascaux Stop-Out Resist 500ml

    £45.60

    Stop-out resist may be painted thickly on a smooth substrate to generate a contour lines. The resists can be used to seal collagraph plates when necessary (e.g. absorbent substrates or carborundum plates). Learn More
  20. Lascaux Plate-Backing Resist 500ml

    Lascaux Plate-Backing Resist 500ml

    £45.60

    This tough scratch-resistant coloured resist is painted onto the back and edges of the plate to prevent any biting during the etching process. Learn More
  21. Lascaux Hard Resist 500ml

    Lascaux Hard Resist 500ml

    £45.60

    Call to Order

    This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More
  22. Lascaux Coloured coating for Hard Resist

    Lascaux Coloured coating for Hard Resist

    Starting at: £38.70

    These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More
  23. Lascaux Tusche Water-Soluble

    Lascaux Tusche Water-Soluble

    £39.90

    This viscous tusche can be painted in a smooth even layer which can be scratched away to create delicate non-printing lines. It can also be used for a broad range of painted marks, offsetting and pattern-making. The diluted tusche dries to create granular washes that are full of character. Dry marks can be re-wet and altered if required. 500ml. Learn More
  24. Lascaux Soft Resist 500m

    Lascaux Soft Resist 500m

    £45.60

    This slower drying resist is designed to offset easily and is used to make soft crayon- or pencil-like drawings, textures from collages and direct broad line drawings. Learn More
  25. Pfeil Professional Lino and Wood Set B

    Pfeil Professional Lino and Wood Set B

    £125.00

    Call to Order

    Exceptional quality Swiss made carving tools for lino cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length.

    Set B is a perfect overall professional set which includes most of the tools you may need in lino or woodcarving, including some wider tools for larger work. Includes:

    • L 5/3 – 3mm shallow gouge
    • L 7/6 – 6mm gouge
    • L 7/10 – 10mm gouge
    • L 9/5 – 5mm shallow gouge
    • L 11/1 – 1mm U
    • L 12/1 – 1mm V

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  26. Cornelissen Lino Set with 5 Blades

    Cornelissen Lino Set with 5 Blades

    £12.70

    Call to Order

    Wooden handle with 5 interchangeable blades. The blades are pushed into the handle, and removed using the dowel included. The blades are made from hardened cutting steel. Includes: - 1 x V-shape; - 1 x fine U-shape; - 1 x medium U-shape; - 1 x wide U-shape; - 1 x knife blade. Replacement blades are available for this set.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  27. Pfeil Professional Lino and Wood Set C

    Pfeil Professional Lino and Wood Set C

    £125.00

    Call to Order

    Exceptional quality Swiss made carving tools for lino cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length.

    Set C is designed for very fine detailed lino or woodcarving projects. The set Includes:

    • L 8/3 – 3mm curved gouge
    • L 8/7 – 7mm curved gouge
    • L 9/2 – 2mm shallow gouge
    • L 11/0.5 – 0.5mm U
    • L 12/4 – 4mm V
    • L 15/2 – 2mm V

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  28. Essdee Linocut Tool Sets

    Essdee Linocut Tool Sets

    Starting at: £7.30

    Call to Order

    Essdee Linocut Tool Sets. Five or ten varied blades that can easily be secured into and removed from a comfortable handle.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  29. Lyons Burin Squares

    Lyons Burin Squares

    Starting at: £13.00

    Call to Order

    Primary engraving tool for printmakers. Square shape cutting edge makes a V-shape line as deep as it is wide. Total length: 11.5 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  30. Charbonnel High-Grade Litho Ink

    Charbonnel High-Grade Litho Ink

    £57.20

    Charbonnel high-grade lithography ink, 125g. Paste drawing ink, very greasy, for heavily drawn or painted images. Can be softened with warm water. Learn More

Items 91 to 120 of 180 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Grid  List 

Set Descending Direction
My Basket

You have no items in your shopping basket.

GIFTS
Important
© 2025 Cornelissen & Son
Phone: +44 (0) 20 7636 1045
Email: info@cornelissen.com
Developed by NIT