Click to Hide Notification

Printmaking

Printmaking

Items 1 to 30 of 199 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. Lascaux Coloured coating for Hard Resist

    Lascaux Coloured coating for Hard Resist

    Starting at: £33.00

    These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More
  2. Lascaux Hard Resist 500ml

    Lascaux Hard Resist 500ml

    £39.00

    This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More
  3. Lascaux Soft Resist 500m

    Lascaux Soft Resist 500m

    £39.00

    This slower drying resist is designed to offset easily and is used to make soft crayon- or pencil-like drawings, textures from collages and direct broad line drawings. Learn More
  4. Lascaux Plate-Backing Resist 500ml

    Lascaux Plate-Backing Resist 500ml

    £39.00

    This tough scratch-resistant coloured resist is painted onto the back and edges of the plate to prevent any biting during the etching process. Learn More
  5. Lascaux Stop-Out Resist 500ml

    Lascaux Stop-Out Resist 500ml

    £39.00

    Stop-out resist may be painted thickly on a smooth substrate to generate a contour lines. The resists can be used to seal collagraph plates when necessary (e.g. absorbent substrates or carborundum plates). Learn More
  6. Lascaux Wash Resist 500ml

    Lascaux Wash Resist 500ml

    £39.00

    This coloured granular resist is painted on the plate and used in conjunction with Lascaux Spray/aquatint to create unusual etched effects similar to watercolour or tusche washes. Learn More
  7. Lascaux Aquatint Spray Resist 500ml

    Lascaux Aquatint Spray Resist 500ml

    £39.00

    Call to Order

    This coloured resist is sprayed onto the plate to create a range of controllable tonal effects. It may be used in conjunction with Lascaux Lift solution, other lift methods, stencils and Lascaux Wash resist. Learn More
  8. Lascaux Remover 1L

    Lascaux Remover 1L

    £37.70

    Dried resists are removed by immersing the plate in a tray or tank of Lascaux Remover for 15 to 30 minutes. Learn More
  9. Lascaux Etching Set ARE

    Lascaux Etching Set ARE

    £92.70

    Lascaux ARE Etching Set 3991. Containing one 85ml bottle each of: 2090 Lascaux Hard Resist, 2091 Lascaux Plate-backing Resist, 2092 Lascaux Stop-out Resist, 2093 Lascaux Soft Resist, 2094 Lascaux Wash Resist, 2095 Lascaux Aquatint Spray Resist, 2096 Lascaux Black coating for Hard Resist, 2097 Lascaux White coating for Hard Resist, 2098 Lascaux Remover. Learn More
  10. Cornelissen T73140 Professional Press

    Cornelissen T73140 Professional Press

    £3,200.00

    Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days. Learn More
  11. Cornelissen T52100 Professional Press

    Cornelissen T52100 Professional Press

    £2,800.00

    Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.. Learn More
  12. Cornelissen T52100B Professional Press

    Cornelissen T52100B Professional Press

    £1,700.00

    Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days. Learn More
  13. Miniature Table Presses

    Miniature Table Presses

    Starting at: £220.00

    Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More
  14. Japanese Workbench

    Japanese Workbench

    £10.00

    Workbench/ Bench hook. An aid to safely carve plywood blocks or lino. Hook over edge of table or bench and place surface to be carved in corner as displayed. Please note workbench does not include plywood block. Learn More
  15. Japanese Plywood

    Japanese Plywood

    £4.00

    Japanese Shina Plywood, even grained and relatively featureless and easy to carve in any direction, perfect for traditional mokuhanga printing. 6mm thick, width 110mm length 160mm. Larger sizes coming soon. Learn More
  16. Aisuki 4.5mm (Chisel Shape)

    Aisuki 4.5mm (Chisel Shape)

    £29.90

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  17. Aisuki 3mm (Chisel Shape)

    Aisuki 3mm (Chisel Shape)

    £26.30

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  18. Aisuki 1.5mm (Chisel Shape)

    Aisuki 1.5mm (Chisel Shape)

    £26.30

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  19. Aisuki 1mm (Chisel Shape)

    Aisuki 1mm (Chisel Shape)

    £26.30

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  20. Komasuki 6mm (U Shape)

    Komasuki 6mm (U Shape)

    £34.50

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  21. Komasuki 3mm (U Shape)

    Komasuki 3mm (U Shape)

    £26.90

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  22. Komasuki 1.5mm (U Shape)

    Komasuki 1.5mm (U Shape)

    £26.30

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  23. Komasuki 1mm (U Shape)

    Komasuki 1mm (U Shape)

    £28.70

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  24. Hangito 3mm (Right Handed)

    Hangito 3mm (Right Handed)

    £26.30

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More
  25. Hangito 1.5mm (Right Handed)

    Hangito 1.5mm (Right Handed)

    £26.30

    Call to Order

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More
  26. Kentonomi

    Kentonomi

    £52.00

    Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet. Learn More
  27. Sankaku-toh 6mm (V Shape)

    Sankaku-toh 6mm (V Shape)

    £45.50

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  28. Sankaku-toh 4.5mm (V Shape)

    Sankaku-toh 4.5mm (V Shape)

    £39.90

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  29. Sankaku-toh 3mm (V Shape)

    Sankaku-toh 3mm (V Shape)

    £35.80

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More
  30. Sankaku-toh 1.5mm (V Shape)

    Sankaku-toh 1.5mm (V Shape)

    £35.80

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Items 1 to 30 of 199 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction