Cornelissen
-
-
Easy Grip Crible Point Sharp No 93
£13.90Easy Grip Crible Point Sharp #93 A traditional crible point for creating indentations in the plate. 120mm length dot. -Heavy duty tool with tapered shaft ending in a small dot -Tempered steel Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More -
Easy Grip Crible Point Squat No 94
£13.90Easy Grip Crible Point Squat #94 Heavy duty tool with tapered shaft ending in a point Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More -
-
-
Mezzotint Rocker 50 lines 40mm
£94.60Call to Order
Mezzotint Rocker 50 lines in square cm. 40 mm wide. Learn More -
Roulette Medium Crossed Lines No1
£13.00Roulette Medium Crossed Lines Long handle 10x10 mm. #1 Learn More -
Roulette Coarse Crossed Lines No 7
£13.00Roulette Coarse Crossed Lines Long handle 10x10 mm. #7 Learn More -
Roulette Fine Crossed Lines No 14
£15.00Roulette Fine Crossed Lines Long handle 7,5 x 5 mm. #14 Learn More -
Roulette Crossed Lines Mushroom Handle No 6C
£18.20Roulette Mushroom handle Crossed Lines 20x 15 mm. #6C Learn More -
Japanese Complete Woodblock Set
£55.00Complete Mokuhanga set for beginners. This set includes; 1x Sosaku inking brush 15mm, 1x Tokibo carrying brush for glue, 5pcs pencil style carving tools in a plastic case including; 7mm Aisuki (flat), 10mm Hangi-toh (knife), 3mm Komasuki (U), 3mm Sankatu-toh (V), 6mm Asamaru (shallow U), 1x plastic inking dish, 1x plastic baren 120mm, 1x shina plywood 160mm x 110mm, 1 x pack of 4 colours of waterbased printing in premixed with glue paste. Learn More -
Japanese Easy Grip Tento Carving Set
£21.00Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More -
Japanese Classic Tool Set in Denim Case
£29.00Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These are pencil style tools with an imitation wooden handle that is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More -
Lino Set with 5 Cutters
£12.70Wooden handle with 5 blades. The blades are pushed into the handle, and removed by using the dowel. The blades are made from hardened steel. The set contains 1 x V blade, 3 x U blades and 1 straight blade. Replacement blades are available for this set. Learn More -
Essdee Lino Set
£38.10This comprehensive kit includes a wide selection of tools and materials for Lino cutting and printing. You can experiment with artisan printing techniques and compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren is a tool for transferring ink from your lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. You can make many prints with the water based ink whilst keeping your work space clean with the handy ink tray. This educational and fun kit is ideal for making unique greeting cards, gifts, posters or even great works of art! Full instructions are included. Recommended Age: 12 and up with adult supervision. Learn More -
Aluminium Ready Stretched Screen
Starting at: £39.00
Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More -
Aluminium Coating Trough 18" with ends
£31.00Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More -
Hing Clamps (per pair)
£16.00Hinge clamps, these are zinc plated aluminium clamps for attaching screens to any surface to create printing bed. Clamp surface is 60mm wide, and will securely hold a frame depth of min: 12mm and max: 45mm. The clamps have counter sunk screw holes 6mm diameter and 30mm a part (centres). Clamp opens up to 90 degrees. Learn More -
Stencil Strip 500ml
£10.00Stencil strip, this is a concentrated organic emulsifying stripper that is made using natural mineral salts. It quickly removes all stencil emulsions and capillary films. Can be diluted up to 1:10 with water. Always wear gloves and avoid contact with eyes. Learn More -
-
Superior Extra Soft Rubber Rollers
Starting at: £203.30
Extra Soft (35 shore) NBR rubber rollers suitable for fine relief printing (lino, wood engraving and wood cut) and intaglio applications. The surface of the soft rubber is machined several times with a special grinder to achieve the complete smoothness of the rollers. Solid heavy metal handle. Each roller is supplied in secure wooden box. Learn More -
Superior Medium Soft Rubber Rollers
Starting at: £112.50
Medium/Soft Superior NBR Rubber Rollers available in 3 different width and 60mm diameter. Suitable for all fine printmaking applications including wood engraving, lino cut and wood cut. Solid metal handle. Learn More -
Lithography Leather Roller 35cm
£493.50Traditional rolling up roller and colour printing roller supplied with leather grip handles for easy rotation. Diameter: 10cm Length: 35cm. Wider (45 cm) version available upon special order request (£560.00 Inc VAT). Learn More -
Carborundum Powder
Starting at: £11.50
Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More -
Asphaltum Powder
Starting at: £14.30
Used in etching grounds and stopping out varnishes. Can be used as a blackish brown colourant but when combined with oil causes wrinkling and cracking. Learn More -
Tallow
Starting at: £34.60
Used in printmaking. Imparts softness and greasiness. An ingredient for producing soft etching ground. Learn More -
Ferric Chloride
Starting at: £15.00
For the etching of plates for printing fine art images in intaglio. Ferric Chloride can be used as a non toxic alternative to nitric acid in the etching process. Suitable for etching most types of metals including copper, zinc, mild steel, aluminium, iron and brass. Learn More -
Traditional Sumi Baren
£46.50Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More -
Sosaku Brush 24mm
£11.15Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Sosaku Brush 60mm
£18.60Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More