Search results for: 'The And'

Japanese Classic Tool Set in Wooden Case

£34.00

Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing. Learn More

Roberson Copperplate Reducing Oil

Starting at: £21.90

Printing inks can be made by mixing powdered pigments with copperplate oil. Pour small quantity of oil into well of dry pigment and grind with glass muller untill smooth. Thin oil is then added until mixture has consistency of double cream. Thin, Medium or Thick. Learn More

Lascaux Tusche Diluting Liquid 500ml

£36.50

A ready-to-use liquid for diluting Lascaux Tusches to alter their handling characteristics or to create delicate washes on positives. Learn More

Hing Clamps (per pair)

£16.00

Hinge clamps, these are zinc plated aluminium clamps for attaching screens to any surface to create printing bed. Clamp surface is 60mm wide, and will securely hold a frame depth of min: 12mm and max: 45mm. The clamps have counter sunk screw holes 6mm diameter and 30mm a part (centres). Clamp opens up to 90 degrees. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Rohrer & Klingner Litho Chalk

Starting at: £17.10

Composed of wax, tallow and Syrian asphalt, the litho chalks feature high resistance against acids. To maintaine quality of the stone, they do not seal the pores of the stone surface. Available in six degrees of hardness with No. 0 being the softest, No. 5 the hardest, and No. 3 the most commonly applied. Learn More

Roberson Rhinds Stopping Out Varnish

Starting at: £8.60

Traditional strongly resistant SOV. Very dark and opaque finish. Appropriate for backing the plate as well as stopping out areas. Learn More

Lascaux Tusche Waterproof 500ml

£42.90

Fast drying, waterproof and scuff resistant, this semi-viscous tusche has homogeneous covering power and is useful for a broad range of painted marks. The diluted tusche dries to resemble ‘toad-skin’ washes usually found in zinc-plate lithography. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Intaglio Etching Set

£88.60

The selection covers the basic tools for traditional etching as well as copper and wood engraving. The set consist of small curved burnisher, twisted double needle, scraper and fine, medium and large burin square engraving tools. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Charbonnel Whites

Starting at: £19.85

Charbonnel Whites Learn More

Lascaux Tusche Wash 500ml

£42.90

This Tusche has handling qualities similar to ink and can be diluted to make gradated washes typical of stone lithography. By scratching into the dry marks, delicate non-printing lines can be created. Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sosaku Brush 60mm

£18.60

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Komasuki 1mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sosaku Brush 15mm

£6.50

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Aisuki 4.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lino Set with 5 Cutters

£12.70

Wooden handle with 5 blades. The blades are pushed into the handle, and removed by using the dowel. The blades are made from hardened steel. The set contains 1 x V blade, 3 x U blades and 1 straight blade. Replacement blades are available for this set. Learn More

Kentonomi

£37.00

Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet. Learn More

Lascaux Plate-Backing Resist 500ml

£45.60

This tough scratch-resistant coloured resist is painted onto the back and edges of the plate to prevent any biting during the etching process. Learn More

Lascaux Tusche Soft Ground Effect 500ml

£42.90

This slow drying viscous tusche has been designed to produce effects similar to soft ground in traditional etching. Using this method soft non-printing drawings may be made and impressions of fabric, leaves, feathers and other collage materials may be taken. The tusche can also be used for a broad range of painted marks and can be drawn into with paint shapers and other tools. The diluted tusche dries to creategranular washes. Dry marks can be re-wet and altered. Learn More

Traditional Sumi Baren

£46.50

Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More

Aisuki 1.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Japanese Easy Grip Tento Carving Set

£21.00

Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More

Aluminium Coating Trough 18" with ends

£31.00

Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More

Sankaku-toh 4.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Korns Litho Pencil Core

Starting at: £7.90

For litho on stone, plate and aquatint. Can be mixed with water. For aquatint applications. No.1, 2 and 3 are the most suitable for creating fine tonal effects. Acid resistant. Pencil core fits in our classic 5.5mm clutch pencil. Learn More

Rohrer & Klingner Soft Ground 16g

£17.10

Soft ground is a soft wax mixture for soft ground and cotton ground techniques. The warm ground plate gets coated with suet, which is then wiped off, leaving only a thin film. The soft ground is then applied on the warm plate and spread evenly with a small leather roller. Learn More

Rohrer & Klingner Lithographic Inks

Starting at: £17.10

Liquid lithographic ink and solid (tushe) lithographic ink are highly resistant against acids and can be used to draw on stone, aluminium and zinc plates. Uses a highly dispersed pigment that is compounded from shellac, wax and soap. While the liquid ink is suited for complete covering, the tushe ink is excellent for halftones and transitions. * Please note that the Litho Tusche now comes in a cylindrical shape, rather than the rectangular stick photographed. Learn More

Search results for 'The And'