Search results for 'de 1'
-
Squand, Squeegee Stand
£7.95The Squeegee Stand is designed to make screen products more efficent. It holds your Squeegee upright and keeps your work space mess free. Product Dimensions: 13 x 5.1 x 4.2 cm. Learn More -
Traditional Sumi Baren
£46.50Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More -
Easy Grip Crible Point Sharp No 93
£15.76Easy Grip Crible Point Sharp #93 A traditional crible point for creating indentations in the plate. 120mm length dot. -Heavy duty tool with tapered shaft ending in a small dot -Tempered steel Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More -
Screen Cleaning Brush
£9.00Cleaning brush. Abrasive cleaning pad for cleaning, degreasing and reclaiming screens. This brush is safe on all mesh types. Learn More -
Hing Clamps (per pair)
£16.00Hinge clamps, these are zinc plated aluminium clamps for attaching screens to any surface to create printing bed. Clamp surface is 60mm wide, and will securely hold a frame depth of min: 12mm and max: 45mm. The clamps have counter sunk screw holes 6mm diameter and 30mm a part (centres). Clamp opens up to 90 degrees. Learn More -
Aisuki 4.5mm (Chisel Shape)
£28.00The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Sosaku Brush 24mm
£11.15Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Stencil Strip 500ml
£10.00Stencil strip, this is a concentrated organic emulsifying stripper that is made using natural mineral salts. It quickly removes all stencil emulsions and capillary films. Can be diluted up to 1:10 with water. Always wear gloves and avoid contact with eyes. Learn More -
Kentonomi
£37.00Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet. Learn More -
Aluminium Ready Stretched Screen
Starting at: £39.00
Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More -
Sosaku Brush 60mm
£18.60Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Aisuki 3mm (Chisel Shape)
£28.00The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Lino Set with 5 Cutters
£12.70Wooden handle with 5 blades. The blades are pushed into the handle, and removed by using the dowel. The blades are made from hardened steel. The set contains 1 x V blade, 3 x U blades and 1 straight blade. Replacement blades are available for this set. Learn More -
Japanese Complete Woodblock Set
£55.00Complete Mokuhanga set for beginners. This set includes; 1x Sosaku inking brush 15mm, 1x Tokibo carrying brush for glue, 5pcs pencil style carving tools in a plastic case including; 7mm Aisuki (flat), 10mm Hangi-toh (knife), 3mm Komasuki (U), 3mm Sankatu-toh (V), 6mm Asamaru (shallow U), 1x plastic inking dish, 1x plastic baren 120mm, 1x shina plywood 160mm x 110mm, 1 x pack of 4 colours of waterbased printing in premixed with glue paste. Learn More -
Lithography Leather Roller 35cm
£505.75Traditional rolling up roller and colour printing roller supplied with leather grip handles for easy rotation. Diameter: 10cm Length: 35cm. Wider (45 cm) version available upon special order request (£560.00 Inc VAT). Learn More -
Sosaku Brush 15mm
£6.50Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
-
Aluminium Coating Trough 18" with ends
£31.00Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More -
Miniature Table Presses
Starting at: £311.80
Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More -
Superior Extra Soft Rubber Rollers
Starting at: £212.00
Extra Soft (35 shore) NBR rubber rollers suitable for fine relief printing (lino, wood engraving and wood cut) and intaglio applications. The surface of the soft rubber is machined several times with a special grinder to achieve the complete smoothness of the rollers. Solid heavy metal handle. Each roller is supplied in secure wooden box. Learn More -
Sankaku-toh 1.5mm (V Shape)
£36.00The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Aisuki 1mm (Chisel Shape)
£28.00The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Cornelissen T73140 Professional Press
£3,800.00Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
Komasuki 1mm (U Shape)
£31.00The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Cornelissen T52100B Professional Press
£2,150.00Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
Aisuki 1.5mm (Chisel Shape)
£28.00The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Japanese Classic Tool Set in Wooden Case
£34.00Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing. Learn More -
Komasuki 1.5mm (U Shape)
£31.00The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More -
Cornelissen T52100 Professional Press
£3,250.00Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.
Learn More -
Essdee Lino Set
£43.40This comprehensive kit includes a wide selection of tools and materials for Lino cutting and printing. You can experiment with artisan printing techniques and compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren is a tool for transferring ink from your lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. You can make many prints with the water based ink whilst keeping your work space clean with the handy ink tray. This educational and fun kit is ideal for making unique greeting cards, gifts, posters or even great works of art! Full instructions are included. Recommended Age: 12 and up with adult supervision. Learn More
Shop By
Currently Shopping by:
- Category: Printmaking Remove This Item
- Manufacturer: Cornelissen Remove This Item
Shopping Options
- Category
-
- Etching Needles and Scrapers (1)
- Printmaking Sets (4)
- Screen Printing (6)
- Rollers (3)
- Raw Materials for Printmaking (4)
- Lithography Materials (1)
- Japanese Woodcut (14)
- Etching Presses (4)
- Price
-
- £0.00 - £999.99 (31)
- £2,000.00 - £2,999.99 (1)
- £3,000.00 and above (2)
My Basket
You have no items in your shopping basket.
Important
- Search Brands
-