Search results for 'de 1 2'
25 Item(s)
Grid List
-
Crocus Powder
Starting at: £12.00
A red amorphous powder consisting of ferric chloride oxide. Used as a colourant for ceramic glazes. Also used in polishing glass, metal, or gems. Also known as jeweller's rouge. Learn More -
Cornelissen T52100 Professional Press
£3,250.00Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.
Learn More -
Cornelissen T52100B Professional Press
£2,150.00Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
-
Ferric Chloride
Starting at: £12.00
Ferric chloride is a mordant (corrosive salt) for the etching of metal plates for printing fine art images in intaglio. It can be used as a safer and gentler alternative to nitric acid in the etching process, enabling the printmaker to obtain a high level of accuracy and control over the bite achieved. Suitable for metals such as copper, zinc, and steel.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com
IMPORTANT Please refer to the MSDS (Material Safety Data Sheet) below. Dispose of product as hazardous waste.
SHIPPING Please note, we are not able to send this product outside the UK. Learn More
-
Miniature Table Presses
Starting at: £311.80
Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More -
Carborundum Powder
Starting at: £11.50
Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More -
Sosaku Brush 24mm
£11.15Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Aluminium Coating Trough 18" with ends
£31.00Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More -
Superior Extra Soft Rubber Rollers
Starting at: £212.00
Extra Soft (35 shore) NBR rubber rollers suitable for fine relief printing (lino, wood engraving and wood cut) and intaglio applications. The surface of the soft rubber is machined several times with a special grinder to achieve the complete smoothness of the rollers. Solid heavy metal handle. Each roller is supplied in secure wooden box. Learn More -
Cornelissen T73140 Professional Press
£3,800.00Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
Aluminium Ready Stretched Screen
Starting at: £39.00
Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More -
Hing Clamps (per pair)
£16.00Hinge clamps, these are zinc plated aluminium clamps for attaching screens to any surface to create printing bed. Clamp surface is 60mm wide, and will securely hold a frame depth of min: 12mm and max: 45mm. The clamps have counter sunk screw holes 6mm diameter and 30mm a part (centres). Clamp opens up to 90 degrees. Learn More -
Sosaku Brush 60mm
£18.60Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Screen Cleaning Brush
£9.00Cleaning brush. Abrasive cleaning pad for cleaning, degreasing and reclaiming screens. This brush is safe on all mesh types. Learn More -
Traditional Japanese Sumi Baren
£46.50Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More -
Asphaltum Powder
Starting at: £14.30
Call to Order
Used in etching grounds and stopping out varnishes. Can be used as a blackish brown colourant but when combined with oil causes wrinkling and cracking. Learn More -
Hangito 1.5mm (Right Handed)
£48.80Call to Order
The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Essdee Complete Linocut Set
£43.40Call to Order
A comprehensive kit with a wide selection of tools and materials for Lino cutting and printing. Compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren tool transfers ink from the lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. Water based ink. Educational and fun, ideal for making cards, posters and artworks. Full instructions included. Includes: 5 x Lino Cutters; 1 x Safety Lino Cutter; 1 x Lino Cutter Handle; 1 x Aluminium Ferrule; 2 x Linoleum Blocks 178x127 mm; 2 x Softcut Blocks 150x100 mm; 1 x Practice Piece; 1 x Ink Roller (Brayer) 100 mm Wide; 1 x Ink Tray 240x200 mm; 1 x Safety Hand Guard; 1 x Baren Cap; 1 x Baren Base; 1 x 100ml Tube Premium Water-Based Block Printing Ink; 2 x 45mm Printing Stamps.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Cornelissen Lino Set with 5 Blades
£12.70Call to Order
Wooden handle with 5 interchangeable blades. The blades are pushed into the handle, and removed using the dowel included. The blades are made from hardened cutting steel. Includes: - 1 x V-shape; - 1 x fine U-shape; - 1 x medium U-shape; - 1 x wide U-shape; - 1 x knife blade. Replacement blades are available for this set.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Sosaku Brush 15mm
£6.50Call to Order
Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Hangito 3mm (Right Handed)
£28.00Call to Order
The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Japanese Complete Woodblock Set
£55.00Call to Order
Complete Mokuhanga set for beginners. This set includes: - 1 x Sosaku inking brush 15mm; - 1 x Tokibo carrying brush for glue; - 5 x carving tools in a plastic case (7mm Aisuki (flat), 10mm Hangi-toh (knife), 3mm Komasuki (U), 3mm Sankatu-toh (V), 6mm Asamaru (shallow U)); - 1 x plastic inking dish; - 1x plastic baren, 120mm; - 1x Shina plywood 160mm x 110mm; - 4 x water-based inks premixed with glue paste.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Stencil Strip 500ml
£10.00Call to Order
Stencil strip, this is a concentrated organic emulsifying stripper that is made using natural mineral salts. It quickly removes all stencil emulsions and capillary films. Can be diluted up to 1:10 with water. Always wear gloves and goggles, and avoid contact with skin and eyes.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Artools Easy-Grip Crible Point, Sharp, No. 93
£15.76Call to Order
Artools Easy-Grip Crible Point, Sharp, No. 93 A traditional crible point for creating indentations in the plate. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Total length: 12 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
25 Item(s)
Grid List
Currently Shopping by:
- Category: Printmaking Remove This Item
- Manufacturer: Cornelissen Remove This Item
Shopping Options
- Category
- Price
-
- £0.00 - £999.99 (22)
- £2,000.00 - £2,999.99 (1)
- £3,000.00 and above (2)
You have no items in your shopping basket.
- Search Brands
-