Search results for: 'DE'

Sosaku Brush 24mm

£11.15

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Aisuki 3mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sharpening Stones

Starting at: £14.05

Professional sharpening stones used to hone each blade's cutting power on a variety of different printmaking tools. The Slip Stone is coarse whilst the Arkansas Stone has a very finely abrasive surface, perfect for carefully restoring a dull cutting instrument to its former brightness. These stones can be used to best advantage with a little honing oil. Learn More

Stencil Strip 500ml

£10.00

Stencil strip, this is a concentrated organic emulsifying stripper that is made using natural mineral salts. It quickly removes all stencil emulsions and capillary films. Can be diluted up to 1:10 with water. Always wear gloves and avoid contact with eyes. Learn More

Gamblin Textile Black Relief Ink 1lb

£25.00

For block printing on t-shirt and cotton fabric Intense, rich black Designed for even coverage Fast drying No fillers, additives or modifiers Colourfast Learn More

Artools Easy-Grip Crible Point, Squat, No. 94

£15.76

Artools Easy-Grip Crible Point, Squat, No. 94. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lyons Burin Squares

Starting at: £13.00

Primary engraving tool for printmakers. Square shape cutting edge makes a V-shape line as deep as it is wide. Total length: 11.5 cm. Learn More

Roberson Copperplate Reducing Oil

Starting at: £24.00

Printing inks can be made by mixing powdered pigments with copperplate oil. Pour small quantity of oil into well of dry pigment and grind with glass muller untill smooth. Thin oil is then added until mixture has consistency of double cream. Thin, Medium or Thick. Learn More

Lascaux Tusche Wash 500ml

£42.90

This Tusche has handling qualities similar to ink and can be diluted to make gradated washes typical of stone lithography. By scratching into the dry marks, delicate non-printing lines can be created. Learn More

Charbonnel Lamour Black

Starting at: £30.20

Bitumen, turpentine. Covering varnish with hard finish. Recommended for aquatint techniques. Learn More

Traditional Japanese Sumi Baren

£46.50

Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lithography Leather Roller 35cm

£505.75

Traditional rolling up roller and colour printing roller supplied with leather grip handles for easy rotation. Diameter: 10cm Length: 35cm. Wider (45 cm) version available upon special order request (£560.00 Inc VAT). Learn More

Superior Extra Soft Rubber Rollers

Starting at: £212.00

Extra Soft (35 shore) NBR rubber rollers suitable for fine relief printing (lino, wood engraving and wood cut) and intaglio applications. The surface of the soft rubber is machined several times with a special grinder to achieve the complete smoothness of the rollers. Solid heavy metal handle. Each roller is supplied in secure wooden box. Learn More

Aluminium Coating Trough 18" with ends

£31.00

Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More

Pfeil Arkansas Stone Set of 4

£65.00

Pfeil's Arkansas Sharpening Stones are made for honing cutting edges such as lino and wood cutting tools and etching tools. Genuine Arkansas stones are among the hardest and finest of honing stones. Use with special light honing oil. Each stone measures 65mm x 25mm x 8mm, with a grit rating of circa 8,000. Learn More

Lyons Twisted Double Needle

£11.60

Twisted double-ended drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 17 cm. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lascaux Soft Resist 500m

£45.60

This slower drying resist is designed to offset easily and is used to make soft crayon- or pencil-like drawings, textures from collages and direct broad line drawings. Learn More

Lyons Single-Row Roulette Wheels

£46.00

Made of high-carbon tool-steel, Lyons roulettes produce regular line or dot patterns on metal plates. The 85-line, single-row tool is ideal for adding fine details and retouching. Total length: 12.5 cm. Learn More

Charbonnel Whites

Starting at: £19.85

Charbonnel Whites Learn More

Lyons Straight Burnishers

Starting at: £15.70

Straight-tipped burnisher designed to flatten burrs, smoothen details, and polish the plate surface, for both image-making and correction purposes. The total length of the small burnisher is 14.5 cm, while the large measures 17.75 cm. Learn More

Lyons Solid Triangular Scraper

Starting at: £14.30

Solid triangular blade with three sharp sides used for scraping away the surface of the metal plate, for both image-making and correction purposes. The total length of the small scraper is 15.25 cm, while the large measures 17.75 cm. Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Rohrer & Klingner Autographic Ink

Starting at: £24.60

Autographic ink is a particularly greasy ink used for drawing in silkscreen or lithography, or as a transfer ink. It can be applied to transference paper, ideally one that is strongly sized with a fine grain, or it can be directly applied to the stone. Learn More

Soft Rubber Lino Rollers

Starting at: £11.00

A soft compound EPDM at 40 shore. Resistant to printers chemicals and not affected by exposure to daylight, this is a long life product. This brayer is designed to give a more compliant coverage than hard rubber material. More forgiving on uneven surfaces, proving to be a favourite with certain printing methods but needing extra care in storage to prevent indentation to its soft surface. Especially developed for relief printing. Learn More

Pfeil Lino and Woodcut Tools

Starting at: £20.00

Exceptional quality Swiss made carving tools, suitable for either lino or wood cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length. Learn More

Cornelissen T52100 Professional Press

£3,250.00

Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.

Learn More

Lascaux Coloured coating for Hard Resist

Starting at: £38.70

These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More

Search results for 'DE'