Search results for: 'The And'

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Rohrer & Klingner Litho Chalk

Starting at: £17.10

Composed of wax, tallow and Syrian asphalt, the litho chalks feature high resistance against acids. To maintaine quality of the stone, they do not seal the pores of the stone surface. Available in six degrees of hardness with No. 0 being the softest, No. 5 the hardest, and No. 3 the most commonly applied. Learn More

Roberson Rhinds Stopping Out Varnish

Starting at: £8.60

Traditional strongly resistant SOV. Very dark and opaque finish. Appropriate for backing the plate as well as stopping out areas. Learn More

Lascaux Tusche Waterproof 500ml

£42.90

Fast drying, waterproof and scuff resistant, this semi-viscous tusche has homogeneous covering power and is useful for a broad range of painted marks. The diluted tusche dries to resemble ‘toad-skin’ washes usually found in zinc-plate lithography. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Intaglio Etching Set

£88.60

The selection covers the basic tools for traditional etching as well as copper and wood engraving. The set consist of small curved burnisher, twisted double needle, scraper and fine, medium and large burin square engraving tools. Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Charbonnel Whites

Starting at: £19.85

Charbonnel Whites Learn More

Lascaux Tusche Wash 500ml

£42.90

This Tusche has handling qualities similar to ink and can be diluted to make gradated washes typical of stone lithography. By scratching into the dry marks, delicate non-printing lines can be created. Learn More

Sosaku Brush 60mm

£18.60

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Komasuki 1mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sosaku Brush 15mm

£6.50

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Aisuki 4.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Miniature Table Presses

Starting at: £311.80

Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More

Lascaux Studio Acrylic Colours 250ml

Starting at: £25.70

Great quality acrylic paints ideal to use in silkscreen printing. Mix the colours undiluted to obtain the desired hue and then add the Lascaux Screenprinting Paste. It is advisable to experiment initially, to determine satisfactory working mixes. To find a satisfactory working ratio, it is useful to first print colours using a 50/50 mixture of undiluted colour to paste and to then shift the ratio depending on the results. *Please note, this range is stored offsite. Please allow extra time for your order to be processed and dispatched. Learn More

Aluminium Ready Stretched Screen

Starting at: £39.00

Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More

Lascaux Coloured coating for Hard Resist

Starting at: £38.70

These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More

Cornelissen T52100 Professional Press

£3,250.00

Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.

Learn More

Gamblin Burnt Plate Oils

Starting at: £10.50

Burnt Plate Oils are used to lower the viscosity of the ink. Burnt Plate Oil should be added to inks sparingly, as the detail of a print may be lost if the ink becomes too fluid. Burnt Plate Oil #000 has less tack and is a good match for use with Gamblin Relief Inks. Burnt Plate Oil #2 has a higher tack and is the primary oil binder for Gamblin Etching Inks. Learn More

Lascaux Hard Resist 500ml

£45.60

This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More

Cornelissen T73140 Professional Press

£3,800.00

Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

Learn More

Cornelissen T52100B Professional Press

1 Review(s) | Add Your Review

£2,150.00

Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

Learn More

Easy Grip Crible Point Sharp No 93

£15.76

Easy Grip Crible Point Sharp #93 A traditional crible point for creating indentations in the plate. 120mm length dot. -Heavy duty tool with tapered shaft ending in a small dot -Tempered steel Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Easy Grip Crible Point Squat No 94

£15.76

Easy Grip Crible Point Squat #94 Heavy duty tool with tapered shaft ending in a point Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Pfeil Arkansas Stone Set of 4

£65.00

Pfeil's Arkansas Stones are sharpening stones made for honing cutting edges such as lino cutting tools and etching tools. Genuine Arkansas stones are among the hardest and finest of honing stones. Use with special light honing oil. Colors range from white to black. Grit: ca. 8000 Size: ca. 65mm x 25mm x 8mm Learn More

Mezzotint Rockers

Starting at: £114.00

Rockers are (7 inches long) including the stained birch handle and made with the highest quality high carbon tool steel, EC Lyons rockers are known world wide as the finest mezzotint rockers available. The gauge (screen) sizes are available in Course (45), Medium (65 and 85), and Fine (100) lines per inch. By working the rocker (with a rocking motion) over a copper/zinc plate in a criss-cross fashion one creates burrs that will trap the ink to produce rich velvety black tones unequalled in any other intaglio process. Learn More

Gamblin Etching Inks 300ml

Starting at: £20.90

Gamblin Etching Inks were formulated at the request of professional printmakers in the Pacific Northwest who wanted strong reliable inks for edition printing. The palette of pure intense pigments offers a broad range of color mixing potential. Learn More

Lithography Leather Roller 35cm

£505.75

Traditional rolling up roller and colour printing roller supplied with leather grip handles for easy rotation. Diameter: 10cm Length: 35cm. Wider (45 cm) version available upon special order request (£560.00 Inc VAT). Learn More

Hangito 3mm (Right Handed)

£28.00

The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More

Search results for 'The And'