Search results for 'red'
-
Cornelissen T52100B Professional Press
£2,150.00Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
Rohrer & Klingner Transparent Ground Cap
£9.30Transparent etching ground in cap form is a light-coloured, transparent product for etching plates that already carry sketch which is meant to remain visible under the etching ground. Learn More -
Swanskin Etching Press Blankets
Starting at: £0.95
Swanskin is more durable than compressed wool and can handle higher pressures for longer, which is particularly noticeable when editioning in large numbers. It is best as the uppermost, thickest blanket that sits immediately beneath the roller of the press. Thickness: 8 mm. Manufactured by A W Hainsworth at their West Yorkshire mill. The quantity you enter below is the length you would like in centimetres. The total will be calculated automatically in your basket. Learn More -
Sosaku Brush 60mm
£18.60Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Schmincke Lino Water-based Inks 250ml
Starting at: £22.60
Call to Order
Water based inks for block printing and linocut. Learn More -
Artools Tempered Steel Drypoint Needle, No. 49A
£15.76Call to Order
Artools Tempered Steel Drypoint Needle, No. 49APERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Sosaku Brush 15mm
£6.50Call to Order
Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Komasuki 6mm (U Shape)
£31.00Call to Order
The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Lino Tools
Starting at: £11.80
Call to Order
Professional lino-cutting tools made by E C Lyons from high-carbon steel. Total length of each tool: 10 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Artools Twisted Double-Ended Needle / Scraper, No. 47
£16.70Call to Order
Artools Twisted Double-Ended Needle / Scraper, No. 47PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Steel Etching Needle
£11.70Call to Order
Wooden-handled drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 15.25 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Sankaku-toh 3mm (V Shape)
£36.00Call to Order
The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Twisted Double Needle
£11.60Call to Order
Twisted double-ended drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 17 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Komasuki 1.5mm (U Shape)
£31.00Call to Order
The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Pfeil Professional Lino and Wood Set B
£125.00Call to Order
Exceptional quality Swiss made carving tools for lino cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length.
Set B is a perfect overall professional set which includes most of the tools you may need in lino or woodcarving, including some wider tools for larger work. Includes:
• L 5/3 – 3mm shallow gouge
• L 7/6 – 6mm gouge
• L 7/10 – 10mm gouge
• L 9/5 – 5mm shallow gouge
• L 11/1 – 1mm U
• L 12/1 – 1mm VPERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Friedr. Dick Scriber and Light Burnisher
£52.80Call to Order
Scriber and Light Burnisher. Total length: 14 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Diamond Drypoint Needle
£29.00Call to Order
Wooden-handled industrial diamond-tipped drypoint needle/scriber used for adding extra fine detail. Total length: 14 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Japanese Classic Tool Set in Wooden Case
£34.00Call to Order
Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Woodcut Tool Set
£103.05Call to Order
Professional six-tool woodcut set, including the following E C Lyons instruments: - Bent Chisel; - Knife; - V-Shape Tool; - Small Gouge; - Medium Gouge; - Slip Stone (for sharpening tools).PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Hangito 3mm (Right Handed)
£28.00Call to Order
The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Burin Squares
Starting at: £13.00
Call to Order
Primary engraving tool for printmakers. Square shape cutting edge makes a V-shape line as deep as it is wide. Total length: 11.5 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Japanese Woodcut Tool Set of 7
£205.00Call to Order
Japanese seven-tool woodcut set in a wooden box. Cherrywood handles with hard, durable, high-carbon steel blades. Includes: - Hangito (Knife) 6 mm; - Komasuki (U-shape) 3 mm; - Komasuki (U-shape) 6 mm; - Aisuki (Chisel) 1.5 mm; - Aisuki (Chisel) 3 mm; - Aisuki (Chisel) 6 mm; - Sankaku-toh (V-shape) 4.5 mm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Needle Point and Burnisher
£20.60Call to Order
Twisted steel handle with straight burnisher on one side and drypoint needle/scriber on the other. Made of high-carbon tool-steel. Total length is 17.75 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Friedr. Dick Heavy Scriber
£24.90Call to Order
Heavy and durable etching needle. Total length: 14 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Japanese Complete Woodblock Set
£55.00Call to Order
Complete Mokuhanga set for beginners. This set includes: - 1 x Sosaku inking brush 15mm; - 1 x Tokibo carrying brush for glue; - 5 x carving tools in a plastic case (7mm Aisuki (flat), 10mm Hangi-toh (knife), 3mm Komasuki (U), 3mm Sankatu-toh (V), 6mm Asamaru (shallow U)); - 1 x plastic inking dish; - 1x plastic baren, 120mm; - 1x Shina plywood 160mm x 110mm; - 4 x water-based inks premixed with glue paste.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Aisuki 3mm (Chisel Shape)
£28.00Call to Order
The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lyons Engraving Tool Set
£80.55Call to Order
Professional six-tool wood and copper engraving set, including the following E C Lyons gravers: - Lozenge Graver No. 5; - Flat Graver No. 40; - Flat Graver No. 46; - Round Graver No. 54; - Round Graver No. 60; - Point Graver No. 3.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Friedr. Dick Double Burnisher
£77.40Call to Order
Double Burnisher. Total length: 19 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Kentonomi
£37.00Call to Order
Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Artools Easy-Grip Crible Point, Sharp, No. 93
£15.76Call to Order
Artools Easy-Grip Crible Point, Sharp, No. 93 A traditional crible point for creating indentations in the plate. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Total length: 12 cm.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More


