Click to Hide Notification

Search results for 'st ar'

Items 91 to 108 of 108 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  1. Essdee Complete Linocut Set

    Essdee Complete Linocut Set

    £43.40

    Call to Order

    A comprehensive kit with a wide selection of tools and materials for Lino cutting and printing. Compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren tool transfers ink from the lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. Water based ink. Educational and fun, ideal for making cards, posters and artworks. Full instructions included. Includes: 5 x Lino Cutters; 1 x Safety Lino Cutter; 1 x Lino Cutter Handle; 1 x Aluminium Ferrule; 2 x Linoleum Blocks 178x127 mm; 2 x Softcut Blocks 150x100 mm; 1 x Practice Piece; 1 x Ink Roller (Brayer) 100 mm Wide; 1 x Ink Tray 240x200 mm; 1 x Safety Hand Guard; 1 x Baren Cap; 1 x Baren Base; 1 x 100ml Tube Premium Water-Based Block Printing Ink; 2 x 45mm Printing Stamps.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  2. Lyons Needle Point and Burnisher

    Lyons Needle Point and Burnisher

    £20.60

    Call to Order

    Twisted steel handle with straight burnisher on one side and drypoint needle/scriber on the other. Made of high-carbon tool-steel. Total length is 17.75 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  3. Sankaku-toh 6mm (V Shape)

    Sankaku-toh 6mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  4. Lyons Intaglio Tool Set

    Lyons Intaglio Tool Set

    £91.25

    Call to Order

    Professional six-tool intaglio set, including the following E C Lyons instruments for traditional etching as well as copper and wood engraving: - Small Curved Burnisher; - Twisted Double Needle; - Small Scraper; - Burin Square No. 4; - Burin Square No. 5; - Elliptic Tint Tool No. 3.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  5. Komasuki 6mm (U Shape)

    Komasuki 6mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  6. Sankaku-toh 3mm (V Shape)

    Sankaku-toh 3mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  7. Komasuki 1.5mm (U Shape)

    Komasuki 1.5mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  8. Pfeil Professional Lino and Wood Set C

    Pfeil Professional Lino and Wood Set C

    £125.00

    Call to Order

    Exceptional quality Swiss made carving tools for lino cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length.

    Set C is designed for very fine detailed lino or woodcarving projects. The set Includes:

    • L 8/3 – 3mm curved gouge
    • L 8/7 – 7mm curved gouge
    • L 9/2 – 2mm shallow gouge
    • L 11/0.5 – 0.5mm U
    • L 12/4 – 4mm V
    • L 15/2 – 2mm V

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  9. Hangito 3mm (Right Handed)

    Hangito 3mm (Right Handed)

    £28.00

    Call to Order

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  10. Cornelissen Lino Set with 5 Blades

    Cornelissen Lino Set with 5 Blades

    £12.70

    Call to Order

    Wooden handle with 5 interchangeable blades. The blades are pushed into the handle, and removed using the dowel included. The blades are made from hardened cutting steel. Includes: - 1 x V-shape; - 1 x fine U-shape; - 1 x medium U-shape; - 1 x wide U-shape; - 1 x knife blade. Replacement blades are available for this set.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  11. Aisuki 3mm (Chisel Shape)

    Aisuki 3mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  12. Kentonomi

    Kentonomi

    £37.00

    Call to Order

    Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  13. Lyons Linoleum Tool Set

    Lyons Linoleum Tool Set

    £71.10

    Call to Order

    Professional six-tool lino-cut set, including the following E C Lyons instruments: - U-Shape Tool; - V-Shape Tool; - Lino Knife; - Small Gouge; - Medium Gouge; - Large Gouge.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  14. Aisuki 1mm (Chisel Shape)

    Aisuki 1mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  15. Lyons Burnisher and Scraper

    Lyons Burnisher and Scraper

    £28.00

    Call to Order

    Combined triangular scraper and curved burnisher made of high-carbon tool-steel. Total length is 17.75 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  16. Sankaku-toh 4.5mm (V Shape)

    Sankaku-toh 4.5mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  17. Asphaltum Powder

    Asphaltum Powder

    Starting at: £14.30

    Call to Order

    Used in etching grounds and stopping out varnishes. Can be used as a blackish brown colourant but when combined with oil causes wrinkling and cracking. Learn More
  18. Sosaku Brush 15mm

    Sosaku Brush 15mm

    £6.50

    Call to Order

    Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Items 91 to 108 of 108 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction