Click to Hide Notification

  • Home /
  • Search results for: 'al'

Search results for 'al'

Items 151 to 180 of 180 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Grid  List 

Set Ascending Direction
  1. Lino Cutters in Boxes of 12

    Lino Cutters in Boxes of 12

    Starting at: £8.10

    Call to Order

    Lino Cutters in Boxes of 12

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  2. Lascaux Screenprinting Paste 500ml

    Lascaux Screenprinting Paste 500ml

    £29.00

    Call to Order

    Lascaux Screenprinting Paste was designed to be used in conjunction with Lascaux Colours as part of a non-toxic, waterbased programme for screenprinting that would not only meet the demands of health and safety regulations but also offers a high standard of reproduction and an ease of use. Furthermore, all the qualities of the existing Lascaux colour ranges can be exploited: a wide range of colours, intensity of hues, colour permanence etc. The additional range of mediums and varnishes, further lends surprising versatility to the system. Learn More
  3. Artools Easy-Grip Crible Point, Sharp, No. 93

    Artools Easy-Grip Crible Point, Sharp, No. 93

    £15.76

    Call to Order

    Artools Easy-Grip Crible Point, Sharp, No. 93 A traditional crible point for creating indentations in the plate. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Total length: 12 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  4. Hangito 1.5mm (Right Handed)

    Hangito 1.5mm (Right Handed)

    £48.80

    Call to Order

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  5. Lyons Intaglio Tool Set

    Lyons Intaglio Tool Set

    £91.25

    Call to Order

    Professional six-tool intaglio set, including the following E C Lyons instruments for traditional etching as well as copper and wood engraving: - Small Curved Burnisher; - Twisted Double Needle; - Small Scraper; - Burin Square No. 4; - Burin Square No. 5; - Elliptic Tint Tool No. 3.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  6. Artools Twisted Double-Ended Needle / Scraper, No. 47

    Artools Twisted Double-Ended Needle / Scraper, No. 47

    £16.70

    Call to Order

    Artools Twisted Double-Ended Needle / Scraper, No. 47

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  7. Aisuki 1.5mm (Chisel Shape)

    Aisuki 1.5mm (Chisel Shape)

    £28.00

    Call to Order

    The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  8. Artools Drypoint Needle, Long Handle, No. 46P

    Artools Drypoint Needle, Long Handle, No. 46P

    £10.45

    Call to Order

    Drypoint Needle, Long Handle, No. 46P

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  9. Sankaku-toh 6mm (V Shape)

    Sankaku-toh 6mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  10. Lyons Burin Squares

    Lyons Burin Squares

    Starting at: £13.00

    Call to Order

    Primary engraving tool for printmakers. Square shape cutting edge makes a V-shape line as deep as it is wide. Total length: 11.5 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  11. Essdee Complete Linocut Set

    Essdee Complete Linocut Set

    £43.40

    Call to Order

    A comprehensive kit with a wide selection of tools and materials for Lino cutting and printing. Compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren tool transfers ink from the lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. Water based ink. Educational and fun, ideal for making cards, posters and artworks. Full instructions included. Includes: 5 x Lino Cutters; 1 x Safety Lino Cutter; 1 x Lino Cutter Handle; 1 x Aluminium Ferrule; 2 x Linoleum Blocks 178x127 mm; 2 x Softcut Blocks 150x100 mm; 1 x Practice Piece; 1 x Ink Roller (Brayer) 100 mm Wide; 1 x Ink Tray 240x200 mm; 1 x Safety Hand Guard; 1 x Baren Cap; 1 x Baren Base; 1 x 100ml Tube Premium Water-Based Block Printing Ink; 2 x 45mm Printing Stamps.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  12. Friedr. Dick Scriber and Light Burnisher

    Friedr. Dick Scriber and Light Burnisher

    £52.80

    Call to Order

    Scriber and Light Burnisher. Total length: 14 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  13. Lyons Double-Ended Drypoint Needle

    Lyons Double-Ended Drypoint Needle

    £16.80

    Call to Order

    Cork-handled, double-ended drypoint needle/scriber used for adding linear detail. Made of high-carbon tool-steel to a traditional specification. Total length: 15.25 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  14. Sosaku Brush 15mm

    Sosaku Brush 15mm

    £6.50

    Call to Order

    Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More
  15. Komasuki 6mm (U Shape)

    Komasuki 6mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  16. Lascaux Hard Resist 500ml

    Lascaux Hard Resist 500ml

    £45.60

    Call to Order

    This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More
  17. Sankaku-toh 3mm (V Shape)

    Sankaku-toh 3mm (V Shape)

    £36.00

    Call to Order

    The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  18. Schmincke Lino Water-based Inks 250ml

    Schmincke Lino Water-based Inks 250ml

    Starting at: £22.60

    Call to Order

    Water based inks for block printing and linocut. Learn More
  19. Lyons Needle Point and Burnisher

    Lyons Needle Point and Burnisher

    £20.60

    Call to Order

    Twisted steel handle with straight burnisher on one side and drypoint needle/scriber on the other. Made of high-carbon tool-steel. Total length is 17.75 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  20. Friedr. Dick Light Scriber

    Friedr. Dick Light Scriber

    £27.30

    Call to Order

    Light etching needle for fine detail. Total length: 18 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  21. Komasuki 1.5mm (U Shape)

    Komasuki 1.5mm (U Shape)

    £31.00

    Call to Order

    The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  22. Lyons Woodcut Tool Set

    Lyons Woodcut Tool Set

    £103.05

    Call to Order

    Professional six-tool woodcut set, including the following E C Lyons instruments: - Bent Chisel; - Knife; - V-Shape Tool; - Small Gouge; - Medium Gouge; - Slip Stone (for sharpening tools).

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  23. Superior Medium Soft Rubber Rollers

    Superior Medium Soft Rubber Rollers

    Starting at: £133.20

    Call to Order

    Medium/Soft Superior NBR Rubber Rollers available in 3 different width and 60mm diameter. Suitable for all fine printmaking applications including wood engraving, lino cut and wood cut. Solid metal handle. Learn More
  24. Japanese Woodcut Tool Set of 7

    Japanese Woodcut Tool Set of 7

    £205.00

    Call to Order

    Japanese seven-tool woodcut set in a wooden box. Cherrywood handles with hard, durable, high-carbon steel blades. Includes: - Hangito (Knife) 6 mm; - Komasuki (U-shape) 3 mm; - Komasuki (U-shape) 6 mm; - Aisuki (Chisel) 1.5 mm; - Aisuki (Chisel) 3 mm; - Aisuki (Chisel) 6 mm; - Sankaku-toh (V-shape) 4.5 mm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  25. Lyons Draw Tool for Cutting Plates

    Lyons Draw Tool for Cutting Plates

    £27.00

    Call to Order

    For scoring sharp, defined lines in order to cut through metal plates. Using a straight edge to pull the tool across the plate repeatedly one can cut their plate to size by snapping it. Made of high-carbon tool-steel. Total length 15.85 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  26. Japanese Classic Tool Set in Wooden Case

    Japanese Classic Tool Set in Wooden Case

    £34.00

    Call to Order

    Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  27. Lascaux Aquatint Spray Resist 500ml

    Lascaux Aquatint Spray Resist 500ml

    £45.60

    Call to Order

    This coloured resist is sprayed onto the plate to create a range of controllable tonal effects. It may be used in conjunction with Lascaux Lift solution, other lift methods, stencils and Lascaux Wash resist. Learn More
  28. Lyons Scratch-Board Tools

    Lyons Scratch-Board Tools

    Starting at: £26.50

    Call to Order

    Made of high-carbon tool-steel, this tool scores multiple parallel lines with one stroke. The number indicates the density of the lines: 25 (broadly spaced thick lines) and 45 (finer spacing and line width). Total length: 13 cm.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  29. Artools Easy-Grip Crible Point, Squat, No. 94

    Artools Easy-Grip Crible Point, Squat, No. 94

    £15.76

    Call to Order

    Artools Easy-Grip Crible Point, Squat, No. 94. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

  30. Hangito 3mm (Right Handed)

    Hangito 3mm (Right Handed)

    £28.00

    Call to Order

    The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.

    PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More

Items 151 to 180 of 180 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Grid  List 

Set Ascending Direction
Shop By

Currently Shopping by:

  1. Category: Printmaking Remove This Item
Clear All

Shopping Options

Category
  1. Charbonnel Aqua Wash Inks (4)
  2. Charbonnel Intaglio Etching Inks (9)
  3. Combination Tools (6)
  4. Etching Burnishers (4)
  5. Etching Grounds (14)
  6. Etching Inks (4)
  7. Etching Needles and Scrapers (12)
  8. Etching Plates (5)
  9. Etching Presses (6)
  10. Etching Press Blankets (2)
  11. Japanese Woodcut (25)
  12. Lascaux Acrylic Resist Etching (9)
  13. Lino Cutters and Engraving Tools (12)
  14. Lithography Materials (13)
  15. Printmaking Accessories (12)
  16. Printmaking Sets (13)
  17. Raw Materials for Printmaking (7)
  18. Relief Printing Inks and Mediums (11)
  19. Relief Printing Surfaces (1)
  20. Rollers (8)
  21. Roulettes and Mezzotint Tools (9)
  22. Screen Printing (16)
Price
  1. £0.00 - £999.99 (177)
  2. £2,000.00 - £2,999.99 (1)
  3. £3,000.00 and above (2)
Manufacturer
  1. Charbonnel (25)
  2. Cornelissen (55)
  3. Daler-Rowney (1)
  4. Gamblin (7)
  5. Korns (3)
  6. Lascaux (19)
  7. Pfeil (5)
  8. Roberson (13)
  9. Rohrer and Klingner (6)
  10. Schmincke (6)
  11. Spectrum (2)
My Basket

You have no items in your shopping basket.

GIFTS
Important
Search Brands
© 2025 Cornelissen & Son
Phone: +44 (0) 20 7636 1045
Email: info@cornelissen.com
Developed by NIT