Search results for: 'design'

Lascaux Tusche Soft Ground Effect 500ml

£42.90

This slow drying viscous tusche has been designed to produce effects similar to soft ground in traditional etching. Using this method soft non-printing drawings may be made and impressions of fabric, leaves, feathers and other collage materials may be taken. The tusche can also be used for a broad range of painted marks and can be drawn into with paint shapers and other tools. The diluted tusche dries to creategranular washes. Dry marks can be re-wet and altered. Learn More

Komasuki 6mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Gamblin Relief Printing Inks 175ml

Starting at: £16.00

Gamblin Relief Inks are formulated for all relief techniques, including woodblock, linocut, monotype, and Solarplate. They contain the right amount of stiffness and tack to hold fine detail yet spread evenly on the block or plate. The palette of ten colors is designed to give artists intense pure pigmented colors straight from the jar, along with a wide range of color mixing capabilities. Gamblin Relief Inks are all bound in the highest quality Burnt Plate Oil. Learn More

Easy Grip Crible Point Squat No 94

£15.76

Easy Grip Crible Point Squat #94 Heavy duty tool with tapered shaft ending in a point Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Komasuki 1.5mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Deburring Plate Tool

£12.60

Specially designed swivelling blade will quickly remove sharp edges from copper, zinc and plastic plates to create a light bevelled edge. Learn More

Lascaux Coloured coating for Hard Resist

Starting at: £38.70

These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More

Hangito 3mm (Right Handed)

£28.00

The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More

Squand, Squeegee Stand

£7.95

The Squeegee Stand is designed to make screen products more efficent. It holds your Squeegee upright and keeps your work space mess free. Product Dimensions: 13 x 5.1 x 4.2 cm. Learn More

Aisuki 3mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 4.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lascaux Tusche Lift Solution 500ml

£36.50

The Lascaux Tusches are a unique range of innovative ready-to-use water-soluble painting materials specially designed for creating positives for light-sensitive printmaking processes. The positives can be used with water-based screenprinting, acrylic-resist etching, solar plate printing and traditional printmaking methods. The Lascaux Lift solution can be used in conjunction with Lascaux Tusche spray for making positives or as a lift in the acrylic-resist etching system. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 1.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Pfeil Professional Lino and Wood Set C

£125.00

Exceptional quality Swiss made carving tools for lino cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length.

Set C is designed for very fine detailed lino or woodcarving projects. The set Includes:

• L 8/3 – 3mm curved gouge
• L 8/7 – 7mm curved gouge
• L 9/2 – 2mm shallow gouge
• L 11/0.5 – 0.5mm U
• L 12/4 – 4mm V
• L 15/2 – 2mm V

Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Cornelissen Lithography Sponge, Compressed

£6.50

Cornelissen Lithography Sponge, Compressed. Designed to keep the litho stone wet during printing. It can be used for preparing printmaking or watercolour paper. Learn More

Lascaux Soft Resist 500m

£45.60

This slower drying resist is designed to offset easily and is used to make soft crayon- or pencil-like drawings, textures from collages and direct broad line drawings. Learn More

Easy Grip Crible Point Sharp No 93

£15.76

Easy Grip Crible Point Sharp #93 A traditional crible point for creating indentations in the plate. 120mm length dot. -Heavy duty tool with tapered shaft ending in a small dot -Tempered steel Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern. Learn More

Komasuki 1mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Soft Rubber Lino Rollers

Starting at: £11.00

A soft compound EPDM at 40 shore. Resistant to printers chemicals and not affected by exposure to daylight, this is a long life product. This brayer is designed to give a more compliant coverage than hard rubber material. More forgiving on uneven surfaces, proving to be a favourite with certain printing methods but needing extra care in storage to prevent indentation to its soft surface. Especially developed for relief printing. Learn More

Aisuki 4.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Aisuki 1.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Lascaux Screenprinting Paste 500ml

£29.00

Call to Order

Lascaux Screenprinting Paste was designed to be used in conjunction with Lascaux Colours as part of a non-toxic, waterbased programme for screenprinting that would not only meet the demands of health and safety regulations but also offers a high standard of reproduction and an ease of use. Furthermore, all the qualities of the existing Lascaux colour ranges can be exploited: a wide range of colours, intensity of hues, colour permanence etc. The additional range of mediums and varnishes, further lends surprising versatility to the system. Learn More

Search results for 'design'