Search results for 'japanese'
-
Chinese Brush, Water Badger Hair
£43.35Large, long tipped brush. Ideal for precision work. Learn More -
Sosaku Brush 15mm
£6.50Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Chinese Brush, Arctic Hare and Goat Hair
£12.50Small, mixed hair brush. Ideal for watercolour painting and loose calligraphy. Learn More -
Chinese Brush, White Cloud, Bristle and Goat Hair, Large
£9.90Extra strength, 'White Cloud' brush. A versatile brush for painting and calligraphy. 4 cm brush head. Learn More -
Chinese Brush, Horse Hair, Small
£26.00Chinese brush, horse hair, small. Strong hairs, suitable for long strokes. Learn More -
Sosaku Brush 24mm
£11.15Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Chinese Brush White Cloud, Goat and Weasel Hair, Small
£6.00Extra strength, 'White Cloud' brush. A versatile brush for painting and calligraphy. 2 cm brush head. Learn More -
Sosaku Brush 60mm
£18.60Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Traditional Japanese Sumi Baren
£46.50Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More -
Cornelissen Japanese & Chinese Gold Leaf Colour Chart
£25.00Cornelissen Sample Chart for genuine Japanese & Chinese Gold Leaf Learn More -
Japanese Gold & Precious Metal Powder
Starting at: £25.00
Premium quality, extra fine genuine gold precious metal powders handcrafted in Japan by experienced craftsmen, all 1 gram in weight. By crushing gold leaves finely and mixing them with melted glue, a paste is obtained, broken into pieces and transformed into powder, called « Kindei » Gold Powder. First, the 0,2 micron gold leaves are crushed into 3 microns pieces. Afterwards, the glue is washed out with water and dried. The powder obtained is as smooth and fine as flour.
Learn More -
-
Japanese Gold 23,44ct
Starting at: £91.90
Highest quality 23,44ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More -
Japanese Gold 23ct
Starting at: £83.00
Highest quality 23ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More -
Japanese Plastic Baren
£7.30Plastic Baren. This is a hard plastic baren 120mm across with dimples over the printing surface. There is no need for a bamboo covering for this baren as with the traditional style and has more durability then the traditional baren due to this. Perfect for those starting mokuhanga. Learn More -
Japanese Workbench
£14.00Workbench/ Bench hook. An aid to safely carve plywood blocks or lino. Hook over edge of table or bench and place surface to be carved in corner as displayed. Please note workbench does not include plywood block. Learn More -
Japanese Gold 22,66ct
Starting at: £81.00
Highest quality 22,66ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More -
Japanese Gold 14,3ct
Starting at: £67.80
Highest quality 14,3ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More -
Japanese Gold 24ct
Starting at: £104.10
Highest quality 24ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More -
Japanese Gold Leaf 22,66ct Enzuke
Starting at: £88.40
Highest quality 22,66ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. Enzuke gold leaf is beaten between sheets of traditional of washi paper called furuya-gami and refers to the subtle grid pattern that appears on the surface of the leaves. In Japan, Enzuke gold is considered more traditional and has a soft lustrous appearance. Each pack contains 10 leaves. Learn More -
Japanese Gold 18,12ct
Starting at: £73.10
Highest quality 18,12ct gold leaf from Japan. Leaves measure 109×109mm and are approximately 0.1μ～0.2μ in thickness. These Tachikiri (contemporary) leaves are beaten in between glassine paper which leaves a much softer impression on the surface of each leaf, resulting in a slightly shinier finish than the more traditional Enzuke gold leaf. Each pack contains 10 leaves. Learn More -
Kentonomi
£37.00Call to Order
Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Aisuki 1mm (Chisel Shape)
£28.00Call to Order
The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Chinese Brush, Goat and Squirrel Hair
£12.30Call to Order
Brush body holds lots of water for washes, ending at a fine tip. Learn More -
Sankaku-toh 6mm (V Shape)
£36.00Call to Order
The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Aisuki 3mm (Chisel Shape)
£28.00Call to Order
The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Sankaku-toh 3mm (V Shape)
£36.00Call to Order
The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Hangito 1.5mm (Right Handed)
£48.80Call to Order
The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Komasuki 1.5mm (U Shape)
£31.00Call to Order
The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Hangito 3mm (Right Handed)
£28.00Call to Order
The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
Currently Shopping by:
- Manufacturer: Cornelissen Remove This Item
Shopping Options
- Category
-
- Drawing, Calligraphy (7)
- Gilding, Restoration (10)
- Printmaking (24)
- Brushes (7)
- Studio, Books (6)
- Price
-
- £0.00 - £99.99 (40)
- £100.00 and above (1)
You have no items in your shopping basket.
- Search Brands
-