Search results for: 'shapes'

Swann Morton Scalpel Handle No4

£7.15

Stainless steel handle No 4 compatible with Blade shapes 22, 23, 25 and 26 Learn More

Swann Morton Scalpel Handle No3

£7.15

Stainless steel handle No 3 compatible with blade shapes 10, 10A, 11, 12 and 15 Learn More

da Vinci Brush Sleeves

£5.20

Brush sleeves are the perfect sundry item to help keep your brushes in perfect condition. Simply pull the sleeve up from from the base of the base of the brush and slide over the brush fibres. Two different sizes are included to accommodate a range of brush shapes. Keep sleeves clean for best protection and longevity. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Plastic 9 Well Flower-shaped Palette

Starting at: £2.95

Plastic 9 Well Flower-shaped Palette Learn More

Original Left-Handed

£2.70

Single block shaped light metal sharpener for left handed users. With 1 spare blade. Learn More

da Vinci Series 5527 COLINEO Watercolour brush, slanted

Starting at: £16.70

COLINEO Watercolour brush, slanted edge, sword shape - Composition of straight and wavy synthetic fibres in different lengths with extra fine tips, precise point, high elasticity and colour absorption - Handle made of water-resistant, hi-tech multicolour laminated wood - Ideal for watercolour painting - Very similar to Kolinsky Red Sable hair brushes Learn More

Aisuki 3mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Cornelissen Oil Sable Filbert

Starting at: £8.45

Similar to the Sable Round but with a filbert shape combining the characteristics of rounds and flats. Excellent spring and colour holding capacity. Learn More

Sankaku-toh 3mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

ArtGraf No 1 Graphite Putty in ceramic jar

£23.40

Water-soluble, kneadable graphite putty allows to mould its shape. Available in ceramic jar with 450g putty. Refills of 150g (pictured) are also available to purchase separately. Learn More

Artists Brass Single

£4.50

Traditional wedge shape sharpener or pencils 7.8mm diameter. Learn More

KUM The Masterpiece Pencil Sharpener

£20.00

Handmade in Germany with two high-carbon blades to shave away the wood and precisely shape the pencil lead. Designed to give you a very long, sharp point, it in works in two stages, first stripping the wood away from the lead (hole number 1) and then by honing the exposed lead to a very fine point (hole number 2). Made from lightweight yet durable magnesium. Blades are made of finely ground high-carbon steel with a hardness of more than 62 hrc. Comes with two spare blades, extras are also available. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Instacoll Gilding System

Starting at: £6.85

Kölner Instacoll is a two-part system, consisting of a base coat and activator, that can be used on nearly all suitably prepared substrates to create weather-resistant, high gloss interior and exterior gilded surfaces. The Instacoll Tool is a double-ended tool with shaped tips made of elastic rubber, designed for pressing gold and silver transfer leaf into indentations when gilding uneven surfaces. The Instacoll Chiffonnette is an extra soft, lint-free cloth, used for polishing and burnishing surfaces gilded with Instacoll. *PLEASE NOTE - COLOURS OF THESE PRODUCTS MAY VARY SLIGHTLY FROM PRODUCTS PICTURED* Learn More

Aluminium Coating Trough 18" with ends

£31.00

Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More

ArtGraf Tailor Shape Primary Colours Set of 3

£24.00

Extremely soft and water soluble, this primary set of 3 colours allows you to create a wide range of colours with both opaque and transparent properties. Learn More

Engraving Set

£78.20

Engraving Set 6 Piece. Wood copper engraving set. Splitsticker, tint tool, lozenge shaped graver, chisel and bullsticker. Learn More

Roberson Interlon Series 64 Filbert

Starting at: £5.60

Made with new improved brown interlocking tapered filaments, these brushes have an excellent shape retention and firm texture. Good spring. Gold colour ferrule with bottle green handle. Learn More

Komasuki 3mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Pentel Colour Brush

Starting at: £4.20

Nylon brush-tipped pen filled with vivid, translucent, water-based ink, available in 12 vibrant colours.Synthetic fibre tip retains its shape and is valve-activated for smooth flow, without leaking.A convenient, portable alternative to traditional brushes. Learn More

Fullers Earth

Starting at: £6.30

Fullers Earth is used to remove plant debris and other impurities from cold-pressed linseed oil, as its large particle size and unusual shape attracts unwanted matter and pulls it down, away from the surface of the oil. Our Fullers earth consist sly of Bentonite.

Learn More

ArtGraf Tailor Shape Set of 6

£41.50

Inspired by traditional tailor’s chalk block, prepared for drawing and painting. Water soluble and extremely soft, the set contains 6 traditional earth colours: sanguine, sepia, dark brown, brown, ochre and carbon black Learn More

Rohrer & Klingner Lithographic Inks

Starting at: £17.10

Liquid lithographic ink and solid (tushe) lithographic ink are highly resistant against acids and can be used to draw on stone, aluminium and zinc plates. Uses a highly dispersed pigment that is compounded from shellac, wax and soap. While the liquid ink is suited for complete covering, the tushe ink is excellent for halftones and transitions. * Please note that the Litho Tusche now comes in a cylindrical shape, rather than the rectangular stick photographed. Learn More

Wood Cut Set

£75.95

Set of five tools and a sharpening stone. Bent chisel, Knife, Straight chisel, V shape gouge, Medium gouge and stone. Learn More

Komasuki 1mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Ceramic 7 Well Flower-shaped Palette

Starting at: £9.80

Ceramic 7 Well Flower-shaped Palette Learn More

Omega Series 57 Hog Sash

Starting at: £15.50

Thick flat hog hair brush with sligtly domed shape. Used for thick applications of oil or acrylic paint. Especially good for applying white lead primer to sized linen. 100% pure hog hair. Learn More

Pfeil Lino and Woodcut Tools

Starting at: £20.00

Exceptional quality Swiss made carving tools, suitable for either lino or wood cutting. Each tool is made from precisely ground stainless steel, with a classic mushroom hardwood handle. 70mm blade length, 125mm overall length. Learn More

Aisuki 4.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Search results for 'shapes'