Search results for: 'wood'

Bockingford Paper Cold Pressed (NOT)

Starting at: £55.36

Surface sized, wove, white, mould made, acid and wood free. Calcium carbonate buffered. Pack contains 25 sheets. Trimmed 4 edges. Learn More

Lyons Steel Etching Needle

£11.70

Wooden-handled drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 15.25 cm. Learn More

da Vinci Series 5527 COLINEO Watercolour brush, slanted

Starting at: £16.70

COLINEO Watercolour brush, slanted edge, sword shape - Composition of straight and wavy synthetic fibres in different lengths with extra fine tips, precise point, high elasticity and colour absorption - Handle made of water-resistant, hi-tech multicolour laminated wood - Ideal for watercolour painting - Very similar to Kolinsky Red Sable hair brushes Learn More

Roberson Turks Aquarella

Starting at: £21.50

For watercolour painting on paper, ivorine, terracotta, wood and fabric. Sizing not needed. Prevents the running of colours, even on open weave fabrics. Learn More

Gesso Panels

Starting at: £28.00

Our Gesso Icon Panels are handmade throughout the entire process, using hand tools rather than industrialised machinery.

Each board is made of lime, which has been allowed to age naturally for long term stability. Firstly, the panel is gently abraded to allow the penetration of rabbit skin glue into the fibres. Following the laying down of a specific canvas, the delicate process of building up precise layers of gesso is undertaken by hand. A final coat of water-based paint treated with wood preservative is applied and the finished panel lightly sanded, ready for painting.

Learn More

Caligo Safe Wash Relief Inks

Starting at: £10.55

Oil-based inks that wash away safely with liquid soap and water. Suitable for all types of relief or block printing, such as woodcut and wood engraving, letterpress and linocut. This range contains less than 1% of driers. For faster drying rates, add a small amount of cobalt or manganese driers. Formulated with excellent light fast pigments for non-toxic printmaking or solvent-free cleaning.

Learn More

Exhibition Stretcher Bars

Starting at: £4.56

Top quality 36mm deep stretcher bars made from European pine. Extra strong laminated wood construction to minimise warping. Mortised for cross bars from 100cm. Mitre cut expansion corners. Lip finished to 2mm radius to minimise cracking on inkjet prints. All stretcher bars are cut 3mm short of nominal size. Supplied with wedges. Prices are for individual bars. Please note, this range is stored off-site. Please allow extra time for your order to be processed and dispatched. [Only available online] Learn More

Lyons Engraving Tool Set

£80.55

Professional six-tool wood and copper engraving set, including the following E C Lyons gravers: - Lozenge Graver No. 5; - Flat Graver No. 40; - Flat Graver No. 46; - Round Graver No. 54; - Round Graver No. 60; - Point Graver No. 3. Learn More

Lyons Intaglio Tool Set

£91.25

Professional six-tool intaglio set, including the following E C Lyons instruments for traditional etching as well as copper and wood engraving: - Small Curved Burnisher; - Twisted Double Needle; - Small Scraper; - Burin Square No. 4; - Burin Square No. 5; - Elliptic Tint Tool No. 3. Learn More

Pfeil Arkansas Stone Set of 4

£65.00

Pfeil's Arkansas Sharpening Stones are made for honing cutting edges such as lino and wood cutting tools and etching tools. Genuine Arkansas stones are among the hardest and finest of honing stones. Use with special light honing oil. Each stone measures 65mm x 25mm x 8mm, with a grit rating of circa 8,000. Learn More

Japanese Plastic Baren

£7.30

Plastic Baren. This is a hard plastic baren 120mm across with dimples over the printing surface. There is no need for a bamboo covering for this baren as with the traditional style and has more durability then the traditional baren due to this. Perfect for those starting mokuhanga. Learn More

Japanese Easy Grip Tento Carving Set

£21.00

Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More

Komasuki 1mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sosaku Brush 15mm

£6.50

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Kentonomi

£37.00

Kentonomi, this chisel is used to cut the traditional Mokuhanga Kento registration mark. This tool is 15mm wide and may be used with a mallet. Learn More

Aisuki 4.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 4.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Aisuki 1.5mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Komasuki 6mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 1.5mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Traditional Japanese Sumi Baren

£46.50

Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More

Komasuki 1.5mm (U Shape)

£31.00

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sosaku Brush 24mm

£11.15

Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More

Hangito 3mm (Right Handed)

£28.00

The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Learn More

Aisuki 1mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Sankaku-toh 6mm (V Shape)

£36.00

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Aisuki 3mm (Chisel Shape)

£28.00

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Search results for 'wood'

Bockingford Paper Cold Pressed (NOT)

Lyons Steel Etching Needle

da Vinci Series 5527 COLINEO Watercolour brush, slanted

Roberson Turks Aquarella

Gesso Panels

Caligo Safe Wash Relief Inks

Exhibition Stretcher Bars

Lyons Engraving Tool Set

Lyons Intaglio Tool Set

Pfeil Arkansas Stone Set of 4

Japanese Plastic Baren

Japanese Easy Grip Tento Carving Set

Komasuki 1mm (U Shape)

Sosaku Brush 15mm

Kentonomi

Aisuki 4.5mm (Chisel Shape)

Sankaku-toh 4.5mm (V Shape)

Aisuki 1.5mm (Chisel Shape)

Komasuki 6mm (U Shape)

Sankaku-toh 1.5mm (V Shape)

Traditional Japanese Sumi Baren

Komasuki 1.5mm (U Shape)

Sosaku Brush 24mm

Hangito 3mm (Right Handed)

Aisuki 1mm (Chisel Shape)

Sankaku-toh 6mm (V Shape)

Aisuki 3mm (Chisel Shape)

Sankaku-toh 3mm (V Shape)

Japanese Workbench

Komasuki 3mm (U Shape)