Search results for: 'en til for'

Roberson Metallic Oil Sticks

Starting at: £16.40

Artists' quality metallic oil paint sticks for painting & drawing. Non-tarnishing and highly pigmented, these soft paint sticks are made with an unique mix of mica pigments, oils and waxes which generate a solid metal effect. Easy to use alongside regular oil paint. Blend and shade the colours together to make further shades. Treat as oil paint for surface preparation and clean-up. Learn More

Roberson Impasto Medium

Starting at: £16.50

Roberson Impasto medium is a crack-resistant medium for impasto effects. It retains palette knife and brush strokes, giving the paint sharp, defined edges. It remains thick and doubles paint easily, drying to a matte finish. To retain colour strength, mix one part medium to one part oil colour.

Contains: Stand Oil, Damar Resin, Turpentine, Bleached Beeswax.

Learn More

Roberson Acrylic Gesso Primer White

Starting at: £21.40

Fast drying, flexible and non yellowing white ground for oil, acrylic and tempera. Gives a matt, absorbent surface which may be sanded smooth once dry. Learn More

Roberson Glaze Medium

Starting at: £9.60

Mix with tube oil colours or pigment to improve flow and translucency. For thin glazes, fine details and smooth brushwork.

Contains: Turpentine, Damar Resin, Stand Oil, Cobalt Dryers.

Learn More

Roberson Mastic Varnish Extra Thin

Starting at: £18.50

Roberson Mastic Varnish Extra Thin. Unable to send overseas. Learn More

Roberson Gum Ammoniac

Starting at: £14.00

Natural gum size made to a traditional recipe. Gum Ammoniac is useful for gilding in small areas and, more generally, in detailed gilding. Two applications are needed if gilding on absorbent paper. Raised areas can be developed by using several layers and allowing each layer to dry first. Gum Ammoniac can be reactivated by breathing on the gum surface. Gum Ammoniac comes to us from Asia and is increasingly hard to source. Learn More

Roberson A81 Varnish

Starting at: £8.50

Roberson A81 Picture Varnish A reversible picture varnish suitable for both specialist conservation work and general picture varnish needs. Non-yellowing, dries to a gloss finish. Cleaning: Wash brushes in turpentine Learn More

Roberson Damar Varnish 5 lb Cut

Starting at: £9.00

Roberson Damar Varnish 5 lb Cut. Unable to send overseas. Learn More

Roberson Mastic Varnish Ordinary

Starting at: £24.40

Roberson Mastic Varnish Ordinary. Unable to send overseas. Learn More

Roberson Acrylic Gold Size

Starting at: £8.60

Easy to use acrylic gold size. Ready for gilding in 15-20 minutes. 1-2 days open time. Learn More

Roberson Satin Glaze Medium

Starting at: £9.80

Mix with tube oil colours or pigment to improve flow and translucency. For thin glazes, fine details and smooth brushwork. Learn More

Roberson Exhibition Varnish

Starting at: £8.10

Apply to touch dry paintings as a temporary exhibition varnish. After 6 months a final picture varnish can be applied with no need to remove Ketone resin/white spirit. Unable to send overseas. Learn More

Roberson Extra Fine Retouching Varnish

Starting at: £8.40

Synthetic, Polaroid B67 retouching varnish made as an alternative to natural resin, Damar retouching varnish. superior non-yellowing characteristics. Less readily absorbed into painted surface and less susceptible sinking. Dries quickly to a breathable, uniform, gloss finish. Learn More

Roberson 1810 Medium

Starting at: £34.20

This is a traditional, high-oil "fat" painting medium, made using the highest quality materials. It will retain colour strength, is resistant to bleeding, has good flow release, is ideal for blending, and can be mixed with oil colours in any ratio. When dry, it creates an enamel-like surface.

Contains: Stand oil, Cold-pressed Linseed oil, Canada Balsam, Rectified Spirit of Turpentine, Beeswax, Driers.

Clean tools in white spirit. Do not use as a varnish, always mix with oil colour.

Learn More

Roberson Beeswax Picture Varnish

Starting at: £10.20

A final picture varnish suitable for both oil and acrylic paintings.

*Unable to send overseas.* Learn More

Roberson Ormoline Gilding Medium

Starting at: £9.50

Acrylic size, fluid enough to use with dip pen. Pink colour. For gilding onto paper and parchment. Learn More

Roberson Damar Varnish Low Gloss

Starting at: £8.90

Gum Damar/Turpentine. Dries hard/clear. Gives low gloss. Less prone to blooming than mastic. Non-yellowing. Removable with turpentine or white spirit. Unable to send overseas. Learn More

Soft Rubber Lino Rollers

Starting at: £11.00

A soft compound EPDM at 40 shore. Resistant to printers chemicals and not affected by exposure to daylight, this is a long life product. This brayer is designed to give a more compliant coverage than hard rubber material. More forgiving on uneven surfaces, proving to be a favourite with certain printing methods but needing extra care in storage to prevent indentation to its soft surface. Especially developed for relief printing. Learn More

Roberson PVA

Starting at: £12.60

PVA mixes with pigments to make glossy acrylic colours or an easy colour wash for walls. Also suitable as an adhesive. Learn More

Roberson Liquid Metal 500ml

Starting at: £34.20

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. This range of paints is suitable for exterior use but must be applied on a dry day as acrylics take longer to dry out completely than oil-based paints. Once dry the paints cure and are hardwearing. Learn More

Roberson Liquid Metal 30ml

Starting at: £7.50

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Roberson White Siccative

Starting at: £8.40

A strontium-based siccative, milder than cobalt driers. Add sparingly to oil colours to accelerate drying, particularly recommended for pale colours. Learn More

Roberson Turks Aquarella

Starting at: £21.50

For watercolour painting on paper, ivorine, terracotta, wood and fabric. Sizing not needed. Prevents the running of colours, even on open weave fabrics. Learn More

Liquid Leaf Brush Bath Thinner and Cleaner

Starting at: £9.90

Brush Bath is a paint thinner and solvent especially formulated for the thinning or cleaning of Liquid Leaf. For spray application, use 15-20% Brush Bath with Liquid Leaf. For cleaning, apply to a soft cloth and wipe affected area. For thinning, mix a small amount of Brush Bath with Liquid Leaf, stirring or shaking container until desired consitency. To clean brushes, pour Brush Bath into a small container and let brushes soak.

Learn More

Roberson Liquid Metal 1Ltr

Starting at: £60.30

Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Roberson Liquid Metal 250ml

Starting at: £18.90

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

Search results for 'en til for'

Roberson Metallic Oil Sticks

Roberson Impasto Medium

Roberson Acrylic Gesso Primer White

Roberson Glaze Medium

Roberson Mastic Varnish Extra Thin

Roberson Gum Ammoniac

Roberson A81 Varnish

Roberson Damar Varnish 5 lb Cut

Roberson Mastic Varnish Ordinary

Roberson Acrylic Gold Size

Roberson Satin Glaze Medium

Roberson Exhibition Varnish

Roberson Extra Fine Retouching Varnish

Roberson 1810 Medium

Roberson Beeswax Picture Varnish

Roberson Ormoline Gilding Medium

Roberson Damar Varnish Low Gloss

Soft Rubber Lino Rollers

Roberson PVA

Roberson Liquid Metal 500ml

Roberson Liquid Metal 30ml

Roberson White Siccative

Roberson Turks Aquarella

Liquid Leaf Brush Bath Thinner and Cleaner

Roberson Liquid Metal 1Ltr

Roberson Liquid Metal 250ml

Roberson White Spirit

Economy Gilders Cushion

Roberson Lino Cutter Handle

Brodie & Middleton Methylated Spirit