Search results for 'roberson'
-
Roberson Acrylic Gold Size
Starting at: £9.40
Easy to use acrylic gold size. Ready for gilding in 15-20 minutes. 1-2 days open time. Learn More -
Roberson Series 44B Hog Bristle Filbert
Starting at: £5.00
Good quality Chinese white interlocking hog hair. Nickel-plated brass seamless ferrule. Maroon handle. Length approximately 300mm / 370mm depending on size. Learn More -
Roberson Canada Balsam Medium
Starting at: £43.90
A high quality painting medium which will produce a deep glow, made from Canada Balsam and Turpentine. Especially effective with transparent oil colours, it is recommended as the medium of choice in the final stages of an oil painting. Learn More -
Roberson Poppy Oil
Starting at: £10.60
Poppy Oil is a slightly later addition to the artist's cabinet than Linseed Oil and Walnut Oil. It is generally used as a binder for pale colours, where the warmth of Linseed Oil is not desired. It provides a matte finish and dries very slowly, so we would not advise using it in conjunction with slow-drying pigments or in underpaintings. A paint film produced by Poppy Oil is weaker and softer than that created by Linseed Oil. This is because it contains a smaller percentage of linolenic acid than Linseed Oil; this substance imparts both strength and yellowness to an oil.
Although some of these properties can be perceived as drawbacks, paints made with Poppy Oil generally obtain a "short" or buttery texture without the addition of waxes or other additives, which can be an advantage for certain colours that produce poor consistencies in Linseed oil alone. Sometimes, the addition of a small quantity of Poppy Oil when grinding a tricky or "stringy" pigment in Cold Pressed Linseed Oil can introduce some of benefits of Poppy Oil, without transmitting its negative characteristics.
Paints made with Poppy Oil are particularly suited to "alla prima" working methods, where paint is applied spontaneously. When working in successive layers, Poppy Oil would only be appropriate for the final stages of a painting.
Learn More -
Roberson Lily Softener 75mm
£21.90Roberson Lily Softener 75mm Professional quality badger brush for softening and blending Learn More -
Roberson Superfine Metallic Bronze Powders 25g
Starting at: £12.10
Roberson Bronze Powders 25g Learn More -
Roberson White Siccative
Starting at: £8.50
A strontium-based siccative, milder than cobalt driers. Add sparingly to oil colours to accelerate drying, particularly recommended for pale colours. Learn More -
Roberson Maroger Medium
Starting at: £19.80
Roberson Maroger Medium can be mixed in equal parts with oil colours to give a lasting brilliance and workable consistency to paints. It prevents sinking when using a wet-in-wet techniques.
Contains: Damar Resin, Gum Arabic, Linseed Oil
Learn More -
Roberson Mastic Varnish Extra Thin
Starting at: £24.20
Roberson Mastic Varnish Extra Thin. Unable to send overseas. Learn More -
Roberson Series 42B Hog Bristle Flat
Starting at: £5.10
Good quality Chinese white interlocking hog hair. Nickel-plated brass seamless ferrule. Maroon handle. Length approximately 300mm / 370mm depending on size. Learn More -
Roberson Damar Varnish 5 lb Cut
Starting at: £9.40
Roberson Damar Varnish 5 lb Cut. Unable to send overseas. Learn More -
Roberson Gum Ammoniac
Starting at: £15.10
Natural gum size made to a traditional recipe. Gum Ammoniac is useful for gilding in small areas and, more generally, in detailed gilding. Two applications are needed if gilding on absorbent paper. Raised areas can be developed by using several layers and allowing each layer to dry first. Gum Ammoniac can be reactivated by breathing on the gum surface. Gum Ammoniac comes to us from Asia and is increasingly hard to source. Learn More -
Roberson Metallic Ink 30ml
Starting at: £11.70
Pale gold, rich pale gold and copper. Non waterproof. Learn More -
Roberson Liquid Metal 5Ltr
Starting at: £260.90
Call to Order
5 Litre containers are not available in the shop, but only as a special order through the website or over the telephone. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 500ml
Starting at: £35.20
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. This range of paints is suitable for exterior use but must be applied on a dry day as acrylics take longer to dry out completely than oil-based paints. Once dry the paints cure and are hardwearing. Learn More -
Roberson Liquid Metal 30ml
Starting at: £7.70
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 1Ltr
Starting at: £61.80
Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 250ml
Starting at: £19.40
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Essdee Linocut Tool Sets
Starting at: £7.90
Call to Order
Essdee Linocut Tool Sets. Five or ten varied blades that can easily be secured into and removed from a comfortable handle.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Lino Cutters in Boxes of 12
Starting at: £8.70
Call to Order
Lino Cutters in Boxes of 12PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Roberson Stainless Steel Gilders Knife
£25.60Call to Order
Gilders Knife StainlessPERMITTED USES Over 18s only. Proof of age required. email: info@cornelissen.com Learn More
-
Roberson Bronze Powders 1 kg
Starting at: £138.30
Call to Order
Roberson Standard Bronze Powders Learn More -
Roberson Interlon Series 64 Filbert
Starting at: £5.60
Call to Order
Made with new improved brown interlocking tapered filaments, these brushes have an excellent shape retention and firm texture. Good spring. Gold colour ferrule with bottle green handle. *AWAITING ARRIVAL OF NEW STOCK* Learn More -
Roberson Badger Softener
Starting at: £40.80
Call to Order
Roberson Badger Softener Ideal for softening, feathering, marbling or blending oil paints. Also used in glasswork and ceramics. Learn More
Currently Shopping by:
- Manufacturer: Roberson Remove This Item
Shopping Options
- Category
-
- Pigments, Gums, Resins (1)
- Oils, Acrylics (52)
- Canvas, Supports (5)
- Watercolour, Gouache, Egg Tempera (3)
- Pastels (1)
- Drawing, Calligraphy (5)
- Gilding, Restoration (28)
- Printmaking (9)
- Brushes (16)
- Paper (1)
- Studio, Books (1)
- Signwriting, Specialist Decorating (9)
- Price
-
- £0.00 - £99.99 (111)
- £100.00 - £199.99 (2)
- £200.00 and above (1)
You have no items in your shopping basket.
- Search Brands
-