Search results for 'The And Roll'

Unprimed Linen Learn More

5 Litre containers are not available in the shop, but only as a special order through the website or over the telephone. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More

160GSM, 75cm x 55cm, 50% Cotton, Acid Free, Tub Sized, Antique Wove, Roller Marked, Textured Surface. Learn More

Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

Learn More

Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.

 

Learn More

Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.

Learn More

Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More

Kölner Instacoll is a two-part system, consisting of a base coat and activator, that can be used on nearly all suitably prepared substrates to create weather-resistant, high gloss interior and exterior gilded surfaces. The Instacoll Tool is a double-ended tool with shaped tips made of elastic rubber, designed for pressing gold and silver transfer leaf into indentations when gilding uneven surfaces. The Instacoll Chiffonnette is an extra soft, lint-free cloth, used for polishing and burnishing surfaces gilded with Instacoll. *PLEASE NOTE - COLOURS OF THESE PRODUCTS MAY VARY SLIGHTLY FROM PRODUCTS PICTURED* Learn More

Arches Aquarelle paper is a mould-made, 100% cotton watercolour paper. It is available in hot pressed, cold pressed and rough surfaces. Gelatine tub sized internally and externally with four deckle edges, acid free and pH neutral.

Mail-order customers are able to buy this paper in packs of 5 or 10 sheets depending on the gsm. Single sheets are also available in our shop.

Learn More

Soft ground is a soft wax mixture for soft ground and cotton ground techniques. The warm ground plate gets coated with suet, which is then wiped off, leaving only a thin film. The soft ground is then applied on the warm plate and spread evenly with a small leather roller. Learn More

Saunders Waterford paper is a mould-made,100% cotton paper for watercolour painting with two deckle edges. Acid-free, gelatine tub-sized and calcium carbonate buffered. 

Mail-order customers are able to buy this paper in packs of 10 sheets. Single sheets are also available in our shop. 

Learn More

Black etching ground in cap form consists of an easily meltable wax that is also solvable in spirits of turpentine. After being molten, the wax can be spread evenly over the plate with the help of a roller or a pad. Learn More

Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More

Gelatine free. A mould-made, acid-free 100% cotton watercolour paper with 2 deckle edges.

Mail-order customers are able to buy this paper in packs of 10 sheets. Single sheets are also available in our shop.

Learn More

For controllable watercolour washes without water logging paper. Learn More

Medium/Soft Superior NBR Rubber Rollers available in 3 different width and 60mm diameter. Suitable for all fine printmaking applications including wood engraving, lino cut and wood cut. Solid metal handle. Learn More

A comprehensive kit with a wide selection of tools and materials for Lino cutting and printing. Compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren tool transfers ink from the lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. Water based ink. Educational and fun, ideal for making cards, posters and artworks. Full instructions included. Includes: 5 x Lino Cutters; 1 x Safety Lino Cutter; 1 x Lino Cutter Handle; 1 x Aluminium Ferrule; 2 x Linoleum Blocks 178x127 mm; 2 x Softcut Blocks 150x100 mm; 1 x Practice Piece; 1 x Ink Roller (Brayer) 100 mm Wide; 1 x Ink Tray 240x200 mm; 1 x Safety Hand Guard; 1 x Baren Cap; 1 x Baren Base; 1 x 100ml Tube Premium Water-Based Block Printing Ink; 2 x 45mm Printing Stamps.

PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More