Search results for 'liquid'
-
Liquid Glass Mediums
Starting at: £19.50
Renaissance Materials by Dr. David Cranswick.
A thick glazing medium of the 'Old Masters'. Liquid Glass Mediums facilitate building up layers of transparent glaze. Gloss or Satin.
Contains: Damar resin, linseed oil and beeswax (for Satin medium only)
Learn More -
Liquid Leaf Metallic Paint
Starting at: £12.50
A remarkable gilding paint that contains its own red primer and film of lustrous gold, premixed into a single liquid. It flows easily onto the surface with no brush marks, forming a beautiful, lustrous finish. It is so controllable that it can be used with a striping brush or ruling pen for fine lines and scrolls. Liquid Leaf can be used on wood, metal, glass, ceramics, papier-mache and cardboard. It can also be used as an ink. One colour of Liquid Leaf can be used over another once dry. For air brushing all colours can be thinned with the Brush Bath. This easy-to-control one-step paint gives a brilliant sheen without brassiness, a permanent finish more closely resembling traditional leafing. A 30ml bottle will cover approximately 2sq/m.
Learn More -
Liquid Leaf Brush Bath Thinner and Cleaner
Starting at: £9.90
Brush Bath is a paint thinner and solvent especially formulated for the thinning or cleaning of Liquid Leaf. For spray application, use 15-20% Brush Bath with Liquid Leaf. For cleaning, apply to a soft cloth and wipe affected area. For thinning, mix a small amount of Brush Bath with Liquid Leaf, stirring or shaking container until desired consitency. To clean brushes, pour Brush Bath into a small container and let brushes soak.
Learn More -
Roberson Liquid Metal 5Ltr
Starting at: £255.80
Call to Order
5 Litre containers are not available in the shop, but only as a special order through the website or over the telephone. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 250ml
Starting at: £18.90
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 1Ltr
Starting at: £60.30
Roberson Liquid Metal 1Ltr. Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 30ml
Starting at: £7.20
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. Learn More -
Roberson Liquid Metal 500ml
Starting at: £34.20
Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. This range of paints is suitable for exterior use but must be applied on a dry day as acrylics take longer to dry out completely than oil-based paints. Once dry the paints cure and are hardwearing. Learn More -
Chinese Liquid Ink
Starting at: £10.00
Thick, black ink for use wih dip pen, reed pen or bush. Learn More -
Roberson Liquid Metal Colour Chart Hand Made
£11.00Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are inter-mixable. This is a double sided and hand painted colour chart of the full range. Learn More
-
Roberson Liquid Metal Acrylic Inks
Starting at: £6.70
Roberson extra fine Liquid Metal Inks for calligaphy and drawing. Apply with dip pen or brush, can be thinned with water if required and will not tarnish. Not suitable for fountain pens or technical drawing pens. Waterproof. Learn More -
Studio Safe Liquid Medium
Starting at: £17.10
Studio Safe Liquid Medium is a mix of Studio Safe Solvent and natural artists' oils. It is used to thin paint and increase gloss. This product is non-aromatic, non-flammable and has an orange scent. Learn More -
Charbonnel Liquid Siccative Varnish 75 ml
£11.60Charbonnel Etching Ground 75 ml Liquid Siccative Varnish. Beeswax, bitumen, ketone thinner. Liquid retouching ground which should be applied cold. Hard, with satin opaque finish. Learn More -
Schmincke Liquid Frisket
Starting at: £5.40
Drawing gum for masking specific areas which should remain white on water-colour paper, smooth drawing carton, photographs or films. Apply with writing pen, cotton bud or wooden stick. Contains: synthetic resin dispersion without ammonia. Learn More -
Charbonnel Ultraflex Liquid Ground
Starting at: £15.80
Judea bitumen, essence of turpentine, wax. Quick drying with transparent velvety finish. Apply cold with a supple brush. Learn More -
Lascaux Tusche Diluting Liquid 500ml
£36.50A ready-to-use liquid for diluting Lascaux Tusches to alter their handling characteristics or to create delicate washes on positives. Learn More -
-
-
Raw Umber Pigment
Starting at: £4.00
PBr7
Raw Umber is a natural earth pigment composed of iron oxide, manganese, and aluminium silicate. It has its roots in the Umbria region of Italy, and was historically a popular colour for underpaintings, as it dries very quickly. It is semi-opaque, very lightfast, and stable in all media but may be difficult to disperse in acrylic. It requires a large amount of liquid when mixed with oil.
Toxicity: B
Learn More -
Caligo Safe Wash Relief Inks
Starting at: £7.80
Oil-based inks that wash away safely with liquid soap and water. Suitable for all types of relief or block printing, such as woodcut and wood engraving, letterpress and linocut. This range contains less than 1% of driers. For faster drying rates, add a small amount of cobalt or manganese driers. Formulated with excellent light fast pigments for non-toxic printmaking or solvent-free cleaning.
Learn More -
Rohrer & Klingner Gloss Intensifier 50ml
£8.90Rohrer & Klingner Liquid Watercolour Gloss Intensifier 50ml Learn More -
-
Universal Lacquer
Starting at: £14.40
Use to protect metal & silver leaf, white gold, Ormoline paint & Robersons Liquid Metal range. Provides extra protection on exterior projects & high-wear areas. It dries crystal clear with a satin finish, and is non-yellowing. Learn More
-
Rohrer & Klingner Drying Retarder 50ml
£8.90Rohrer & Klingner Liquid Watercolour Drying Retarder 50ml Learn More -
Seccotine 30 ml
£8.50Refined liquid fish glue for use as a size for gilding on paper. It can also be used as a glue for paper and as a binder in gesso for raised illumination. Seccotine is made from the skin of the Atlantic deep sea cod fish. It remains flexible after drying.
Learn More -
Rohrer & Klingner Lithographic Inks
Starting at: £17.10
Liquid lithographic ink and solid (tushe) lithographic ink are highly resistant against acids and can be used to draw on stone, aluminium and zinc plates. Uses a highly dispersed pigment that is compounded from shellac, wax and soap. While the liquid ink is suited for complete covering, the tushe ink is excellent for halftones and transitions. * Please note that the Litho Tusche now comes in a cylindrical shape, rather than the rectangular stick photographed. Learn More -
-
Schmincke Artists Watercolour 5 ml Tube
Starting at: £6.35
Finest quality watercolours made in Germany. This range offers 139 colours, including 95 single-pigment colours, 3 perylene pigments, 5 quinacridone pigments, and a selection of granulating colours. They present endless mixing possibilities, and can combined with Schmincke's selection of watercolour mediums as well as with their gouache paints. The solid colours are produced by pouring the liquid paint into the pans four times, ensuring the maximum yield for each colour. Also available in half and whole pans and 15ml tubes. Learn More -
Alizarin Crimson Pigment
Starting at: £4.50
PR83
Alizarin Crimson is a synthetic organic pigment that became available in 1868. It requires a wetting agent to disperse, and in oil it also absorbs a lot of liquid and dries very slowly to form a hard, brittle paint film. It is chemically identical to madder-root pigments and should be protected against UV light where possible as it can fade when applied onto a white ground, although it is less fugitive than its natural counterpart. Alizarin Crimson is a very transparent pigment, with a high tinting strength and slightly blue undertone.
Toxicity: A/B
Larger quantities are available by request.
Learn More -
Winsor & Newton Artists' Gloss Varnish
Starting at: £9.20
Ketone resin/white spirit. Water white liquid dries to non-yellowing glossy film. Learn More
Shopping Options
- Category
-
- Pigments Gums & Resins (4)
- Oils and Acrylics (15)
- Watercolour Gouache & Egg Tempera (7)
- Pastels (2)
- Drawing & Calligraphy (8)
- Gilding & Restoration Materials (11)
- Printmaking (8)
- Brushes (2)
- Price
-
- £0.00 - £99.99 (50)
- £200.00 and above (1)
- Manufacturer
-
- Charbonnel (3)
- Cornelissen (10)
- Da Vinci (2)
- Lascaux (2)
- Pilot (1)
- Roberson (16)
- Rohrer and Klingner (4)
- Schmincke (6)
- Spectrum (2)
- Winsor&Newton (6)
You have no items in your shopping basket.
- Search Brands
-