Search results for 'inks'

Least intense black printing ink for lithography. Learn More

For creating textural and tonal effects. Learn More

Prepared by hand and bottled in a rare, hand-blown laboratory glass Weighing Bottle. 20 ml. Gently twist the hand-formed, flame-like stopper and pull carefully to open. Learn More

Pigment collected from erosion. Learn More

Roberson Liquid Metals have a rich deep colour, ideal for a wide range of applications including plaster, wood, paper & canvas. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. The Liquid Metal range does not tarnish and does not need to be varnished. All colours are intermixable and wash up with water. Coverage is approximately 7 square metres per litre. Two coats are required for most applications but if applied to walls or ceilings with a roller or a brush then three or four coats are recommended. Because of the highly reflective nature of the metallic paint when applying with a roller to a large area apply the paint evenly in long vertical strokes, finishing off the surface by rolling or brushing in one direction, i.e ceiling to floor. This will help to minimise overlapping and create a smooth and even finish. We recommend the use of a professional quality foam roller in order to achieve the best possible finish. When applying with a roller to a large area, apply the paint evenly in long vertical strokes. Finish off the surface by rolling one direction, i.e. ceiling to floor. This will help minimise overlapping and create a smooth, even finish. These paints can also be sprayed and this will produce the best and most consistent finish. To spray Liquid Metal Acrylics, you will need to use HVLP spray equipment with a 1.6mm or 1.8mm nozzle. To ensure proper flow, paint can be thinned with 25-30% water. This range of paints is suitable for exterior use but must be applied on a dry day as acrylics take longer to dry out completely than oil-based paints. Once dry the paints cure and are hardwearing. Learn More

Rohrer and Klingner Writing Ink Glass pen, blue/red. The Glass Pen nib features fine capillaries that ensure a smooth flow of the ink. The pattern on each pen may vary as it is produced and processed exclusively by hand. Learn More

These black or white coatings may be painted onto a dry layer of Hard resist so that the drawing made with etching tools is highly visible. The coloured coatings are not acid-resistant and are designed to be washed away with water before the plate is stopped-out or etched. Learn More

Pigment collected from erosion of modern red brick stock. Learn More

Charbonnel Gold and Silver Learn More

Fine black drawing ink. Very lightfast. For use with brush and technical drawing pen. Waterproof once dry. Learn More

Roberson Metallic Ink 250ml Learn More

Three historical oak gall inks handmade to traditional recipes. Jane Austen Ink. Sir Isaac Newton Ink. Doomsday Ink. Learn More

Purple and Brown Madder Ink Orange Madder Ink Oak Gall Ink Learn More