Search results for 'tools'

Japanese shell gold in ceramic pans.

Shell gold, so named because it was historically made and stored in shallow shells such as mussel shells, consists of finely powdered genuine gold mixed with a variety of gums. This Japanese shell gold range is made using the highest quality handmade Japanese gold and precious metal powders bound with Nikawa gelatine glue.

Mix with a bit of water and apply in the same way as watercolour (a drop of oxgall can be added to break the surface tension) After drying, it can be burnished to a soft, beautiful lustre using an agate stone burnishing tool.
Contains 0.4g Learn More

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Tool set with denim case. Set contains 7pcs, including; 7mm Aisuki (flat), 8mm Hangi-toh (knife), 4mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 4mm Sankatu-toh (V), 10mm Komasuki (U). These pencil-style tools have imitation wooden handles that are longer than those of traditional tools, making them a perfect introduction to Mokuhanga printing. Learn More

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Twisted double-ended drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 17 cm. Learn More

Professional sharpening stones used to hone each blade's cutting power on a variety of different printmaking tools. The Slip Stone is coarse whilst the Arkansas Stone has a very finely abrasive surface, perfect for carefully restoring a dull cutting instrument to its former brightness. These stones can be used to best advantage with a little honing oil. Learn More

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Complete Mokuhanga set for beginners. This set includes; 1x Sosaku inking brush 15mm, 1x Tokibo carrying brush for glue, 5pcs pencil style carving tools in a plastic case including; 7mm Aisuki (flat), 10mm Hangi-toh (knife), 3mm Komasuki (U), 3mm Sankatu-toh (V), 6mm Asamaru (shallow U), 1x plastic inking dish, 1x plastic baren 120mm, 1x shina plywood 160mm x 110mm, 1 x pack of 4 colours of waterbased printing in premixed with glue paste. Learn More

This slow drying viscous tusche has been designed to produce effects similar to soft ground in traditional etching. Using this method soft non-printing drawings may be made and impressions of fabric, leaves, feathers and other collage materials may be taken. The tusche can also be used for a broad range of painted marks and can be drawn into with paint shapers and other tools. The diluted tusche dries to creategranular washes. Dry marks can be re-wet and altered. Learn More

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Small, ball-shaped tool for detailed burnishing, polishing and corrections. Total length: 14.5 cm. Learn More

Each Hazel shaft used in the creation of our Mahl poles is individually selected for straightness and overall appearance before being dried and prepared. We use hazel for strength, weight, and the appearance of its rich brown bark when linseed is applied.

Our pommels and handles are made from a stock of fine Italian leather, used for its durability and flex during assembly.

"Georgeson and Son established in 2012 with a singular aim. To resurrect and manufacture forgotten Artist's tools by hand, as carefully and as beautifully as possible.
  A desire to make useful things that will last underpins all that we do. We use only the finest quality materials, sustainably sourced and refuse to compromise this quality for the sake of profitability."

Learn More

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Japanese seven-tool woodcut set in a wooden box. Cherrywood handles with hard, durable, high-carbon steel blades. Includes: - Hangito (Knife) 6 mm; - Komasuki (U-shape) 3 mm; - Komasuki (U-shape) 6 mm; - Aisuki (Chisel) 1.5 mm; - Aisuki (Chisel) 3 mm; - Aisuki (Chisel) 6 mm; - Sankaku-toh (V-shape) 4.5 mm. Learn More

This product does not contain turpentine, and is therefore suitable for artists with allergies. A 'neutral', nearly non-yellowing painting and thinning medium for oil colours. Applicable for all painting techniques except for ground motifs on slightly absorbent undergrounds (not “lean” enough). Low impact on drying time. Thinner: Terpin (50023) (max. 30%). Dosage: 10 to max. 20%. Learn More

A drawing tool for transferring scale. Align your desired subject matter in the small end of the divider and transfer the spacing of the larger end to your drawing surface. Learn More

For scoring sharp, defined lines in order to cut through metal plates. Using a straight edge to pull the tool across the plate repeatedly one can cut their plate to size by snapping it. Made of high-carbon tool-steel. Total length 15.85 cm. Learn More

This is a traditional, high-oil "fat" painting medium, made using the highest quality materials. It will retain colour strength, is resistant to bleeding, has good flow release, is ideal for blending, and can be mixed with oil colours in any ratio. When dry, it creates an enamel-like surface.

Contains: Stand oil, Cold-pressed Linseed oil, Canada Balsam, Rectified Spirit of Turpentine, Beeswax, Driers.

Clean tools in white spirit. Do not use as a varnish, always mix with oil colour.

Learn More

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Professional six-tool lino-cut set, including the following E C Lyons instruments: - U-Shape Tool; - V-Shape Tool; - Lino Knife; - Small Gouge; - Medium Gouge; - Large Gouge. Learn More

Highly effective. Learn More

Kölner Instacoll is a two-part system, consisting of a base coat and activator, that can be used on nearly all suitably prepared substrates to create weather-resistant, high gloss interior and exterior gilded surfaces. The Instacoll Tool is a double-ended tool with shaped tips made of elastic rubber, designed for pressing gold and silver transfer leaf into indentations when gilding uneven surfaces. The Instacoll Chiffonnette is an extra soft, lint-free cloth, used for polishing and burnishing surfaces gilded with Instacoll. *PLEASE NOTE - COLOURS OF THESE PRODUCTS MAY VARY SLIGHTLY FROM PRODUCTS PICTURED* Learn More

The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Tento easy grip carving set. This set comes in a plastic box and contains 5pcs, including; 7.5mm Hangi-toh (knife), 7.5mm Aisuki (flat), 6mm Komasuki (U), 3mm Komasuki (U), 3mm Sankatu-toh (V). These are pencil style tools with a soft easy grip, non-slip rubber ferrule and plastic handle. The handle is longer when compared to the traditional tools, perfect as an introduction to Mokuhanga printing. Learn More

The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening. Learn More

Wooden-handled drypoint needle/scriber used for adding linear detail to metal plates. Made of high-carbon tool-steel. Total length: 15.25 cm. Learn More

Professional six-tool woodcut set, including the following E C Lyons instruments: - Bent Chisel; - Knife; - V-Shape Tool; - Small Gouge; - Medium Gouge; - Slip Stone (for sharpening tools). Learn More

This resist is painted onto the plate in a thin even layer with a soft flat square-ended brush. When this clear layer is dry it may be coloured or drawn into with etching needles, roulettes and steel wool. The waxy character allows the needle to glide through its surface. After drawing the coloured coating (if used) is removed, the image is stopped out if necessary, then the plate is etched. As the resist is clear the artist can monitor the etching process accurately. Learn More

The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when the ferrule is slipped off so that the blade may be removed for sharpening. Learn More