Search results for 'en til for'
-
Miniature Table Presses
Starting at: £311.80
Type of print: General Intaglio techniques and Monotype. Plate thickness needs to be no higher than 1mm. YTI18 - Width of roller 18cm, Upper roller diameter 35mm, Lower roller diameter 35mm. YTI26 - Width of roller 25cm, Upper roller diameter 35mm, Lower roller diameter 35mm **please note - blankets not included** Learn More -
Sosaku Brush 60mm
£18.60Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Superior Extra Soft Rubber Rollers
Starting at: £212.00
Extra Soft (35 shore) NBR rubber rollers suitable for fine relief printing (lino, wood engraving and wood cut) and intaglio applications. The surface of the soft rubber is machined several times with a special grinder to achieve the complete smoothness of the rollers. Solid heavy metal handle. Each roller is supplied in secure wooden box. Learn More -
Sosaku Brush 24mm
£11.15Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Lithography Leather Roller 35cm
£505.75Traditional rolling up roller and colour printing roller supplied with leather grip handles for easy rotation. Diameter: 10cm Length: 35cm. Wider (45 cm) version available upon special order request (£560.00 Inc VAT). Learn More -
Hing Clamps (per pair)
£16.00Hinge clamps, these are zinc plated aluminium clamps for attaching screens to any surface to create printing bed. Clamp surface is 60mm wide, and will securely hold a frame depth of min: 12mm and max: 45mm. The clamps have counter sunk screw holes 6mm diameter and 30mm a part (centres). Clamp opens up to 90 degrees. Learn More -
Tallow
Starting at: £34.60
Used in printmaking. Imparts softness and greasiness. An ingredient for producing soft etching ground. Learn More -
Ferric Chloride
Starting at: £12.00
Ferric chloride is a mordant (corrosive salt) for the etching of metal plates for printing fine art images in intaglio. It can be used as a safer and gentler alternative to nitric acid in the etching process, enabling the printmaker to obtain a high level of accuracy and control over the bite achieved. Suitable for metals such as copper, zinc, and steel.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com
IMPORTANT Please refer to the MSDS (Material Safety Data Sheet) below. Dispose of product as hazardous waste.
SHIPPING Please note, we are not able to send this product outside the UK. Learn More
-
Carborundum Powder
Starting at: £11.50
Carborundum Powder. Grid of coarseness: Fine 120/220, Medium 80/120, Coarse 60/80 Learn More -
Traditional Japanese Sumi Baren
£46.50Traditional Japanese "ba-ren" is the pressing and rubbing tool for printing. The inner coil or "shin" consists of flat strips of bamboo twisted together into strands and then into a long cord. The cord is then coiled onto a backing disk made from either layers of washi paper, carved wood or plastic. Finally a bamboo sheath or "takenokawa" is used as a covering, with rubbing surface for printing one side and a twisted handle for the artist to hold on the other. Over time the outer sheath may need replacing due to wear and friction of printing. Our "sumi" baren is made in the traditional way with a plastic backing disk and has a finer coil. It is 130mm across and is suitable for printing the "key block" and fine details. This baren comes in a presentation box. Replacement bamboo sheaths are available to order specially. Learn More -
Japanese Workbench
£15.00Workbench/ Bench hook. An aid to safely carve plywood blocks or lino. Hook over edge of table or bench and place surface to be carved in corner as displayed. Please note workbench does not include plywood block. Learn More -
Cornelissen Lithography Sponge, Compressed
£6.50Cornelissen Lithography Sponge, Compressed. Designed to keep the litho stone wet during printing. It can be used for preparing printmaking or watercolour paper. Learn More -
Cornelissen T73140 Professional Press
£3,800.00Cornelissen Press T73140, Bed size: 73 x 140 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Etching press base: 78.5 x 91 cm. Weight: 148 kg. We offer press demonstrations for this model. Please call Cornelissen for more details. This press is made to order. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
Cornelissen T52100B Professional Press
£2,150.00Cornelissen Etching Press T52100B 52 x 100 cm, Bed size: 52 x 100 cm, Upper Roller Diameter: 110 mm, Lower Roller Diameter: 110mm, Weight: 83 kg. Etching press base: 56 x 44 cm. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed. Please be aware these goods are heavy and it is the customer’s responsibility to check measurements for delivery before orders are placed and to be able to receive the goods over two days.
Learn More -
Cornelissen T52100 Professional Press
£3,250.00Cornelissen Press T52100, Bed size: 52 x 100 cm, Upper Roller Diameter: 157 mm, Lower Roller Diameter: 157mm, Weight: 106 kg. Etching press base: 58 x 63 cm. We offer press demonstrations for this model. Please call Cornelissen for more details. Delivery to your address usually takes up to 4 weeks to UK & EU countries and 6 weeks to USA after the order is placed.
Learn More -
Aluminium Coating Trough 18" with ends
£31.00Coating Trough, used to coat screens with Photographic Emulsion. Shaped to allow the weight of the coating trough to be supported by the thumb, the palm and all four fingers for a steady and even coat. Features a dual sided coating edge for either a sharp edge thin coat for higher mesh counts, or a rounded dull edge for coating lower mesh count screens. Learn More -
Screen Cleaning Brush
£9.00Cleaning brush. Abrasive cleaning pad for cleaning, degreasing and reclaiming screens. This brush is safe on all mesh types. Learn More -
Artools Wood & Felt Baren for Relief Printmaking
£6.45Artools Wood & Felt Baren for Relief Printmaking Learn More -
Aluminium Ready Stretched Screen
Starting at: £39.00
Pre-stretched aluminium screens. Our screens use the highest quality monofilament polyester mesh and are available in 43T (for fabric), 90T (for paper) and 120T (for finest detail on paper). The mesh appears in different colours, white is for fabric and yellow is for the higher mesh counts, the colour this makes registering with stencils underneath the screen easier. The screen is made of quality aluminium with a profile of 20mm x 30mm x 1.2mm thick. Learn More -
Artools Easy-Grip Crible Point, Squat, No. 94
£15.76Call to Order
Artools Easy-Grip Crible Point, Squat, No. 94. Heavy-duty, tempered-steel tool with tapered shaft ending in a fine point. Crible points are designed to put small holes or indentations in the surface of the plate, creating a dotted or stippled pattern.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Artools Tempered Steel Drypoint Needle, No. 49A
£15.76Call to Order
Artools Tempered Steel Drypoint Needle, No. 49APERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Artools Drypoint Needle, Long Handle, No. 46P
£10.45Call to Order
Drypoint Needle, Long Handle, No. 46PPERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Sosaku Brush 15mm
£6.50Call to Order
Sosaku inking brush for working the pigments and glue paste onto the carved block for printing. These are made from horse hair and are traditionally prepared by splitting and softening the hair on shark-skin or sandpaper before printing. Brushes come in 3 sizes. Learn More -
Superior Medium Soft Rubber Rollers
Starting at: £133.20
Call to Order
Medium/Soft Superior NBR Rubber Rollers available in 3 different width and 60mm diameter. Suitable for all fine printmaking applications including wood engraving, lino cut and wood cut. Solid metal handle. Learn More -
Komasuki 1mm (U Shape)
£31.00Call to Order
The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Aisuki 4.5mm (Chisel Shape)
£28.00Call to Order
The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Hangito 1.5mm (Right Handed)
£48.80Call to Order
The Hangi-toh is a cutting knife with a bevelled edge. It is used to outline areas to be kept. This is the most useful tool for the Mokuhanga artist. The tool is designed to be held blade down at roughly 90 degree angle with the flat edge of the blade towards line to be kept and the bevelled edge in the area to be carved away. A small amount of pressure is excised by placing thumb over the end of the handle slightly to the left and blade tilted to the right (if you are right handed) so that you may see the blade running down the line as you work, the blade should be guided with the other hand though care is needed not to apply too much pressure. This is the traditional method of holding the tool and, for this reason right and left handed tools are required. (Please note, left handed tools can be ordered by telephone and will take 4-6 weeks to arrive). The blade may be removed and sharpened by slipping off the ferrule. Due to the delicate and fragile nature of this tool, we cannot consider refunds for blade breakage. Please use with utmost care.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Aisuki 1.5mm (Chisel Shape)
£28.00Call to Order
The Aisuki is a clearing tool used for clearing waste from the hangito tool. It is a small fan bevelled chisel and is designed to be used low to the wood. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Sankaku-toh 6mm (V Shape)
£36.00Call to Order
The Sankaku-toh is similar to western style “V” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
-
Komasuki 6mm (U Shape)
£31.00Call to Order
The Komasuki is similar to western style “U” gouge tool and comes in a variety of useful sizes. The handle of the tool is designed to swing open when ferrule is slipped off so that the blade may be removed for sharpening.PERMITTED USES Over 18s only. Proof of age required. E-mail: info@cornelissen.com Learn More
Currently Shopping by:
- Category: Printmaking Remove This Item
- Manufacturer: Cornelissen Remove This Item
Shopping Options
- Category
-
- Combination Tools (1)
- Etching Needles and Scrapers (5)
- Etching Presses (4)
- Japanese Woodcut (24)
- Lino Cutters and Engraving Tools (2)
- Lithography Materials (2)
- Printmaking Accessories (4)
- Printmaking Sets (5)
- Raw Materials for Printmaking (4)
- Rollers (3)
- Screen Printing (5)
- Price
-
- £0.00 - £999.99 (46)
- £2,000.00 - £2,999.99 (1)
- £3,000.00 and above (2)
You have no items in your shopping basket.
- Search Brands
-